- Category: accounting
- Auth: OAUTH2, API_KEY
- Composio-managed OAuth available? No
- Tools: 84
- Triggers: 0
- Slug:
BREX - Version: 20261101_00
Tools
Add Webhook Group Members
Add Webhook Group Members
BREX_ADD_WEBHOOK_GROUP_MEMBERSAdd webhook subscription members to a webhook group. This action associates one or more webhook subscriptions with an existing webhook group, allowing those subscriptions to receive events targeted at the group. Note: Webhook groups are only available for Brex partner accounts. Requires an existing webhook group ID and valid webhook subscription IDs. Use this when you need to organize webhook subscriptions into groups for easier management of webhook events across multiple subscriptions.Input Parameters
Output
Archive Budget
Archive Budget
BREX_ARCHIVE_BUDGETArchive a budget to mark it as inactive and prevent future expenses. Archives the specified budget, making it unusable for new transactions and removing it from active budget lists in the UI. This action is permanent and cannot be undone.Input Parameters
Output
Archive Spend Limit
Archive Spend Limit
Create Budget
Create Budget
Create Spend Limit (Budget V1)
Create Spend Limit (Budget V1)
BREX_CREATE_BUDGET_V1Tool to create a new Spend Limit (Budget) in Brex. Use when you need to set up spending controls with specific limits, visibility settings, and period types.Input Parameters
Output
Create Card
Create Card
BREX_CREATE_CARDCreate a new card and assign it to a user.Input Parameters
Output
Create Document Upload for Referral
Create Document Upload for Referral
BREX_CREATE_DOCUMENTCreate a document upload URL for a referral and return a pre-signed S3 upload URL. Use this tool when you need to upload supporting documents for a business referral application. The tool returns a pre-signed S3 URL that can be used to upload document files (PDF, JPG, PNG, etc.) up to 50 MB. The pre-signed URL expires 30 minutes after creation and can only be used for a PUT operation. Supported document types: - ARTICLES_OF_INCORPORATION: Company incorporation documents - IRS_EIN_CONFIRMATION: IRS CP 575 or 147C form (EIN confirmation letter) - IRS_EIN_APPLICATION: IRS SS4 form (Application for Employer Identification Number) - CERTIFICATE_GOOD_STANDING: Certificate of good standing from the stateInput Parameters
Output
Create Custom Field
Create Custom Field
Create Field Values
Create Field Values
BREX_CREATE_FIELD_VALUESCreate custom field values for a specific Brex field. Use when you need to add new dropdown options or values to a custom field (up to 1000 values per request). This action allows you to bulk-create field values for custom fields in Brex. Custom fields are used throughout Brex for categorizing expenses, cards, budgets, and other entities. Each value can have a custom ID, be marked as disabled, and include an external system reference for integrations.Input Parameters
Output
Create Referral Request
Create Referral Request
BREX_CREATE_REFERRAL_REQUESTTool to create a new referral to Brex for onboarding. Use when you want to refer a prospect to Brex and get a personalized application link. The response contains a unique referral ID and a personalized signup URL. Many fields are optional; when provided, they prefill the application form for the prospect. The referral link expires after a certain time period.Input Parameters
Output
Create Spend Limit
Create Spend Limit
BREX_CREATE_SPEND_LIMITTool to create a spend limit in Brex. Use when you need to establish spending controls with authorization settings, visibility rules, and policy associations. Requires expense policy ID and authorization settings. Optionally link to parent budget.Input Parameters
Output
Create Job Title
Create Job Title
Create User
Create User
Create Vendor
Create Vendor
BREX_CREATE_VENDORCreate a new vendor in Brex for payment operations. The vendor company name must be unique within your Brex account - attempting to create a vendor with a duplicate name will result in an error. You can optionally include contact information (email, phone) and payment account details (ACH, wire transfer, or check) at creation time. Returns a vendor ID that can be used in transfer operations and other vendor-related actions.Input Parameters
Output
Create Webhook Group
Create Webhook Group
Create Webhook Subscription
Create Webhook Subscription
BREX_CREATE_WEBHOOK_SUBSCRIPTIONRegister a new webhook subscription to receive real-time notifications for Brex events. This allows you to be notified via HTTPS POST requests when events occur, such as USER_UPDATED, EXPENSE_PAYMENT_UPDATED, TRANSFER_PROCESSED, TRANSFER_FAILED, and others. Note: Currently only one webhook endpoint can be registered per customer/client_id, though each endpoint can handle multiple event types. Requires ‘openid’ and ‘offline_access’ OAuth scopes, plus event-specific scopes (e.g., ‘expenses.card.readonly’ for EXPENSE_PAYMENT_UPDATED).Input Parameters
Output
Delete Field
Delete Field
Delete Field Values
Delete Field Values
BREX_DELETE_FIELD_VALUESDelete custom field values for a specific field. You can delete up to 1000 values at once. Each value must be identified by exactly one of: brex_id (Brex-generated ID), value_id (value identifier), or remote_id (external system ID). Use this when you need to bulk delete field values from a custom field.Input Parameters
Output
Delete Vendor
Delete Vendor
BREX_DELETE_VENDORDelete a vendor by ID. Use this when you need to remove a vendor from the system. The vendor must exist and not have any pending transactions or dependencies.Input Parameters
Output
Get Account Statements
Get Account Statements
Get Budget Details
Get Budget Details
Get Card Details
Get Card Details
Get Card Expense
Get Card Expense
BREX_GET_CARD_EXPENSETool to retrieve detailed information about a specific card expense by its ID. Use when you need to get comprehensive details about a card transaction, including merchant information, amounts, status, and other expense metadata. Supports expanding additional fields like merchant MCC code, location, department, user, budget, and payment details.Input Parameters
Output
Get Card Number
Get Card Number
Get Card Transactions
Get Card Transactions
BREX_GET_CARD_TRANSACTIONSGet settled card transactions for the primary card account. Returns purchases, refunds, and chargebacks that have been posted/settled. Use the next_cursor field in the response for pagination to retrieve additional results. No server-side date filtering is supported; filter by posted_at_date client-side after fetching. For large accounts, process pages incrementally rather than accumulating all results in memory.Input Parameters
Output
Get Company Cash Accounts
Get Company Cash Accounts
BREX_GET_COMPANY_CASH_ACCOUNTSRetrieve company cash (deposit) accounts one page at a time, including balances, account numbers, routing numbers, and status. Use the next cursor to retrieve additional pages; requires the ‘accounts.cash.readonly’ scope.Input Parameters
Output
Get Company Details
Get Company Details
Get Department By ID
Get Department By ID
Get Expense
Get Expense
BREX_GET_EXPENSETool to get details of a specific expense by ID. Use when you need to retrieve complete information about an expense including merchant details, receipts, budget allocation, and payment status.Input Parameters
Output
Get Field By ID
Get Field By ID
Get Field Value By ID
Get Field Value By ID
Get Legal Entity
Get Legal Entity
Get Location By ID
Get Location By ID
Get Referral By ID
Get Referral By ID
Get Spend Limit By ID
Get Spend Limit By ID
Get Spend Limits
Get Spend Limits
Get Title by ID
Get Title by ID
Get Transaction by ID
Get Transaction by ID
BREX_GET_TRANSACTION_BY_IDGet a card transaction by ID by searching up to 10 pages of transactions from the primary account. A transaction beyond the searched pages may not be found.Input Parameters
Output
Get Card Transactions
Get Card Transactions
BREX_GET_TRANSACTIONSGet settled card transactions from the primary Brex account, with optional client-side posted-date filtering. Results are paginated, but filtering out items clears the next cursor, so filtered results may omit later pages.Input Parameters
Output
Get Transactions by Amount Range
Get Transactions by Amount Range
BREX_GET_TRANSACTIONS_BY_AMOUNT_RANGEFind primary-account card transactions within an inclusive USD amount range and posted-date range. The search covers one page and may not include all matching transactions; the requested result limit is 1–1,000.Input Parameters
Output
Search Transactions by Description
Search Transactions by Description
BREX_GET_TRANSACTIONS_BY_DESCRIPTIONSearch and filter card transactions by description text. This action retrieves transactions from the primary card account and filters them by description (case-insensitive partial match) and date range. Useful for finding all transactions from a specific merchant or category.Input Parameters
Output
Get User Limit
Get User Limit
BREX_GET_USER_LIMITRetrieves the monthly spending limit and available balance for a specific Brex user. Use this action when you need to check how much a user is allowed to spend per month and how much of that limit remains available. Returns empty if no spending limit has been configured for the user.Input Parameters
Output
Get User Profile
Get User Profile
BREX_GET_USER_PROFILEGet user profile information from Brex Team API. Returns the user profile associated with the OAuth2 access token when using ‘me’, or retrieves a specific user’s profile when providing a user ID. Requires ‘users.readonly’ or ‘users’ OAuth scope.Input Parameters
Output
Get Vendor By ID
Get Vendor By ID
Get Webhook Group
Get Webhook Group
BREX_GET_WEBHOOK_GROUPTool to retrieve details of a specific webhook group by ID. Use when you need to get information about a webhook group including its name and identifier. Webhook groups allow webhook subscriptions to target specific members, providing granular control over webhook delivery. This feature is only available for Brex partners. Returns the webhook group’s ID and name.Input Parameters
Output
Get Webhook Subscription
Get Webhook Subscription
BREX_GET_WEBHOOK_SUBSCRIPTIONTool to retrieve details of a specific webhook subscription by ID. Use this when you need to: - Get information about an existing webhook subscription - Verify webhook configuration (URL, event types, status) - Check if a webhook subscription is active or inactive - Retrieve the webhook group ID for partner integrations Returns the webhook subscription’s ID, URL, event types, status (ACTIVE/INACTIVE), and optionally the webhook group ID.Input Parameters
Output
List Budget Programs
List Budget Programs
List Budgets
List Budgets
List Card Accounts
List Card Accounts
BREX_LIST_CARD_ACCOUNTSTool to list all card accounts for the company. Use when you need to retrieve information about card accounts, including balances and statement periods.Input Parameters
Output
List Cards
List Cards
List Card Statements
List Card Statements
BREX_LIST_CARD_STATEMENTSTool to list finalized statements for primary card accounts. Use when you need to retrieve statement history for primary card accounts including balances and statement periods.Input Parameters
Output
List Departments
List Departments
List Expenses
List Expenses
BREX_LIST_EXPENSESTool to list expenses from the Brex platform. Use when you need to retrieve expenses with various filters such as user, budget, date ranges, or status. Supports pagination and expandable fields for additional details.Input Parameters
Output
List Field Values
List Field Values
BREX_LIST_FIELD_VALUESList a page of values under a custom field, optionally filtering by Brex ID, value ID, remote ID, or value string. Use the returned cursor to retrieve subsequent pages.Input Parameters
next_cursor value returned from the previous response. Omit this parameter to fetch the first page of results.Output
List Legal Entities
List Legal Entities
BREX_LIST_LEGAL_ENTITIESTool to list all legal entities in the Brex account with pagination support. Use when you need to retrieve all legal entities or browse through them page by page.Input Parameters
Output
List Locations
List Locations
List Referrals
List Referrals
List Job Titles
List Job Titles
List Transfers
List Transfers
List Trips
List Trips
List Users
List Users
List Vendors
List Vendors
List Webhook Group Members
List Webhook Group Members
BREX_LIST_WEBHOOK_GROUP_MEMBERSTool to list all members of a webhook group. Use when you need to retrieve the webhook subscriptions that are members of a specific webhook group. Supports pagination using cursor and limit parameters.Input Parameters
Output
List Webhook Groups
List Webhook Groups
BREX_LIST_WEBHOOK_GROUPSTool to list all webhook groups. Use when you need to retrieve all webhook groups in the system. Webhook groups allow subscriptions to target specific members and are only available for Brex partners. Supports pagination using cursor and limit parameters.Input Parameters
Output
List Webhook Secrets
List Webhook Secrets
List Webhook Subscriptions
List Webhook Subscriptions
BREX_LIST_WEBHOOK_SUBSCRIPTIONSTool to list all registered webhook subscriptions. Use when you need to retrieve all webhook subscriptions configured in the Brex account, including their URLs, event types, and status. Supports pagination using cursor and limit parameters.Input Parameters
Output
Create Receipt Match
Create Receipt Match
BREX_RECEIPT_MATCHCreates a receipt match request and returns a pre-signed S3 upload URI. Use this when you need to upload a receipt that will be automatically matched to existing Brex card expenses. The returned URI allows secure file upload (max 50 MB) and expires 30 minutes after creation. After upload completes, Brex will automatically attempt to match the receipt with card transactions based on date, amount, and merchant information.Input Parameters
Output
Create Receipt Upload for Expense
Create Receipt Upload for Expense
BREX_RECEIPT_UPLOADCreates a receipt upload request for a specific card expense and returns a pre-signed S3 upload URL. Use this tool when you need to attach a receipt to an existing Brex card expense. The tool returns a pre-signed S3 URL that can be used to upload receipt files (PDF, JPG, PNG, etc.) up to 50 MB. The pre-signed URL expires 30 minutes after creation and can only be used for a PUT operation. Requirements: - The expense_id must belong to an existing card expense in the Brex system - The expense must be accessible by the authenticated user - Receipt file names should include the file extension (e.g., ‘receipt.pdf’, ‘invoice.jpg’) Note: For uploading receipts that should be automatically matched to expenses (without specifying an expense_id), use the BREX_RECEIPT_MATCH action instead.Input Parameters
Output
Set User Limit
Set User Limit
BREX_SET_USER_LIMITSet or update a Brex user’s monthly spending limit, with amounts in the smallest currency unit. A null or omitted monthly limit requests removal of the existing limit.Input Parameters
Output
Update Budget
Update Budget
BREX_UPDATE_BUDGETUpdate an existing budget’s configuration in Brex. This action allows you to modify budget properties such as name, description, amount limits, ownership, parent budget relationships, and recurrence settings. Only the fields you provide will be updated; all other fields remain unchanged. Common use cases: - Adjust budget amounts (increase or decrease limits) - Change budget ownership or reassign to different users - Update budget names and descriptions for clarity - Modify recurrence periods (e.g., change from MONTHLY to QUARTERLY) - Reorganize budget hierarchy by changing parent budgetsInput Parameters
Output
Update Spend Limit (V1)
Update Spend Limit (V1)
BREX_UPDATE_BUDGET_V1Tool to update a Spend Limit (budget) using the v1 API. Use when you need to modify budget details such as name, description, owners, members, limits, or date ranges.Input Parameters
Output
Update Card Limits
Update Card Limits
BREX_UPDATE_CARD_LIMITSUpdate spending limits and controls for a Brex card. This action allows you to modify the spending limits, duration, and lock date for cards that have limit_type=CARD. You can update one or more spend control settings while leaving others unchanged. Cards with limit_type=USER inherit limits from the user and cannot be updated with this action.Input Parameters
Output
Update Card Status
Update Card Status
BREX_UPDATE_CARD_STATUSUpdate the status of a Brex card by locking, unlocking, or terminating it. This action provides a unified interface for card status management: - Lock a card to temporarily block transactions (requires lock_reason) - Unlock a locked card to resume normal operation - Terminate a card permanently (cannot be undone) The action uses the appropriate Brex API endpoint based on the target status.Input Parameters
Output
Update Expense
Update Expense
BREX_UPDATE_EXPENSEUpdate a card expense by ID, modifying one or more of its memo, location, department, or category fields in a single request.Input Parameters
Output
Update Field
Update Field
Update Field Values
Update Field Values
BREX_UPDATE_FIELD_VALUESTool to update custom field values in Brex for a specific field. Use when you need to modify existing field values, supporting batch updates of up to 1000 values at once. Each value can be identified by brex_id (entity identifier), value_id (field value ID), or remote_id (external system ID). The API will update the field values and return the complete updated state including metadata like updated_at timestamps.Input Parameters
Output
Update Spend Limit
Update Spend Limit
BREX_UPDATE_SPEND_LIMITUpdates an existing Brex spend limit by its ID. Allows modifying spend limit properties including name, description, status (ACTIVE/INACTIVE), period settings, authorization controls, spending limits, merchant restrictions, member/owner assignments, and policy associations. At least one optional field must be provided to update. Requires the spend limit ID from BREX_GET_SPEND_LIMITS or creation actions.Input Parameters
Output
Update User
Update User
Update Vendor
Update Vendor
BREX_UPDATE_VENDORTool to update vendor information in Brex. Use when you need to modify vendor details such as company name, email, phone, payment accounts, or beneficiary information.Input Parameters
Output
Update Webhook Subscription
Update Webhook Subscription
BREX_UPDATE_WEBHOOK_SUBSCRIPTIONUpdates an existing Brex webhook subscription’s configuration by ID. The URL, event types, and status must all be supplied; an optional webhook group ID can be supplied for partner integrations.