Skip to main content
Resend logo
  • Category: email
  • Auth: API_KEY, OAUTH2
  • Composio-managed OAuth available? No
  • Tools: 113
  • Triggers: 0
  • Slug: RESEND
  • Version: 20261101_00

Tools

Slug: RESEND_ADD_CONTACT_TO_SEGMENTAdd an existing contact to a segment in Resend. Use when you need to organize contacts into specific segments for targeted communication.

Input Parameters

string
required
The ID of the contact to add to the segment.
string
required
The ID of the segment to add the contact to.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_BATCH_ADD_SUPPRESSIONSAdd between 1 and 100 Resend suppressions to prevent sending to those emails.

Input Parameters

array
required
Email addresses to suppress; provide between 1 and 100 addresses.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_BATCH_REMOVE_SUPPRESSIONSRemove 1–100 Resend suppressions by email addresses or suppression IDs, but not both.

Input Parameters

array
1–100 suppression IDs to remove. Provide either ids or emails, not both.
array
1–100 email addresses to remove from suppressions. Provide either emails or ids, not both.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CANCEL_BROADCASTCancel a queued or scheduled broadcast. Canceling a queued broadcast stops it mid-send: emails already sent are not affected, but no further emails will go out.

Input Parameters

string
required
The UUID of the broadcast to cancel.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CANCEL_EMAILCancel a scheduled email.

Input Parameters

string
required
The id of the email to cancel.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_API_KEYCreate a new API key to authenticate communications with Resend. Use when you need to generate a new authentication token for API access.

Input Parameters

string
required
The API key name. Maximum 50 characters.
string
Restrict an API key to send emails only from a specific domain. Only used when the permission is ‘sending_access’.
string ("full_access" | "sending_access")
API key permission levels.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_AUDIENCECreate a segment using the legacy audience action and response shape.

Input Parameters

string
required
The name of the audience you want to create.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_AUTOMATIONCreate a Resend automation from workflow steps and connections. Use when defining a new automation with at least one trigger step. The automation is disabled by default; set status to enabled to enable it on creation.

Input Parameters

string
required
The name of the automation.
array
required
The steps that compose the automation workflow (1–150). Must include at least one trigger step.
string ("enabled" | "disabled")
The initial status of the automation. Defaults to ‘disabled’ when omitted.
array
required
The connections between steps in the automation graph.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_CONTACTCreate a global contact and add it to the segment identified by audienceId.

Input Parameters

string
required
The email address of the contact. Must be a valid RFC-compliant email address.
string
The last name of the contact.
string
The first name of the contact.
string
required
The segment ID (legacy audienceId parameter). The contact is added to this segment.
boolean
The subscription status.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_CONTACT_IMPORTCreate a contact import from a CSV file, optionally mapping columns and applying segments and topic subscriptions.

Input Parameters

object
required
CSV file to import. Maximum size is 50MB.
string
JSON-encoded array of topic subscriptions to apply to imported contacts. Each subscription must be opt_in or opt_out.
string
JSON-encoded array of segments to add imported contacts to.
string
JSON-encoded object mapping contact fields and custom property keys to CSV column names. Supports email, first_name, last_name, unsubscribed, and properties. Custom property mappings can include type as string, number, or boolean; defaults to string.
string ("upsert" | "skip")
Strategy to use when an imported contact already exists. The provider defaults to skip when omitted.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_CONTACT_PROPERTYTool to create a new contact property in Resend. Use when you need to define custom fields for contacts.

Input Parameters

string
required
The key of the contact property. Must be alphanumeric and underscore only, max 50 characters. Case sensitive.
string ("string" | "number")
required
The type of the contact property.
string
The fallback value for the property. Must match the type of the property.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_CONTACT_V2Tool to create a new contact in Resend. Use when you need to add a contact to Resend without specifying an audience.

Input Parameters

string
required
The email address of the contact.
array
List of topic subscriptions with ID and subscription status (opt_in or opt_out).
array
List of segment IDs to enroll the contact in.
string
The last name of the contact.
string
The first name of the contact.
array
Custom key-value pairs for the contact. Each property must have a key and value.
boolean
Contact’s global subscription status; when true, the contact opts out of all broadcasts.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_DOMAINCreate a domain through the Resend Email API. The domain is created in a pending/unverified state and cannot be used for sending emails until DNS verification is completed.

Input Parameters

string
required
The name of the domain to be created.
string ("us-east-1" | "eu-west-1" | "sa-east-1" | "ap-northeast-1")
The region where emails will be sent from. Supported values: ‘us-east-1’, ‘eu-west-1’, ‘sa-east-1’. Unsupported values cause validation errors.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_DOMAIN_CLAIMStart a claim for a domain another Resend account has already verified. Recreates the domain under your account with fresh DKIM keys; the previous account’s DNS records cannot be reused. Add the returned TXT record to DNS to prove ownership. An identical pending claim is returned unchanged.

Input Parameters

string
required
The name of the domain you want to claim.
string ("us-east-1" | "eu-west-1" | "sa-east-1" | "ap-northeast-1")
The region where emails will be sent from.
boolean
Track the open rate of each email.
boolean
Track clicks within the body of each HTML email.
string
Return-Path subdomain; defaults to send (send.yourdomain.tld).
string
The subdomain to use for click and open tracking.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_DRAFT_BROADCASTCreate a broadcast and leave it as an unsent draft. Use when you want to stage a campaign for review; this action never sends or schedules the broadcast, so a separate send step is always required.

Input Parameters

string
required
The sender email address. To include a friendly name, use the format ‘Your Name <sender@domain.com>’.
string
The HTML version of the message. May include contact properties such as {{{contact.first_name|there}}} and the {{{RESEND_UNSUBSCRIBE_URL}}} placeholder.
string
The friendly name of the broadcast. Only used for internal reference.
string
The plain text version of the message. If omitted, Resend generates it from the HTML.
string
required
The subject line of the email.
array
The email addresses to which replies should be sent.
string
The ID of the topic the broadcast will be scoped to.
string
required
The ID of the segment the broadcast will be addressed to. Audiences are now called segments, so an audience ID is accepted here.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_EVENTCreate a Resend event definition, optionally with a typed payload schema. Use when registering a custom event for automations; this does not emit an event. Event names cannot start with the reserved resend: prefix.

Input Parameters

string
required
The name of the event. Cannot start with the reserved resend: prefix.
object
An optional flat key/type map defining the event payload schema. Supported types are string, number, boolean, and date.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_SEGMENTCreate a new segment for contacts to be added to. Use when you need a fresh list of contacts to target; segments are the modern replacement for audiences.

Input Parameters

string
required
The name of the segment you want to create.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_SUPPRESSIONCreate a Resend suppression for an email address to prevent sending to it.

Input Parameters

string
required
Email address to suppress.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_TEMPLATETool to create a new email template in Resend. Use when you need to define reusable email templates with optional variables.

Input Parameters

string
Sender email address. To include a friendly name, use the format ‘Your Name <sender@domain.com>’.
string
required
The HTML version of the template. Use {{VARIABLE_NAME}} syntax to reference template variables.
string
required
The name of the template.
string
The plain text version of the template. If omitted, Resend will auto-generate from HTML.
string
The alias of the template. This is an optional identifier that can be used instead of the template ID.
string
Email subject for the template.
string
Reply-to email address. For multiple addresses, send as an array of strings.
array
Template variables. Up to 50 variables can be defined per template.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_TOPICTool to create a new topic to segment your audience. Use when you need to create a topic for organizing contacts by interests or preferences.

Input Parameters

string
required
The topic name. Max length is 50 characters.
string ("public" | "private")
Topic visibility on the unsubscribe page.
string
The topic description. Max length is 200 characters.
string ("opt_in" | "opt_out")
required
The default subscription preference for new contacts. Accepts opt_in or opt_out. This value cannot be modified afterwards.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_CREATE_WEBHOOKTool to create a webhook to receive real-time notifications about email events. Use when you need to set up automated notifications for email status changes.

Input Parameters

array
required
Array of event types to subscribe to. Common events include: ‘email.sent’, ‘email.delivered’, ‘email.delivery_delayed’, ‘email.complained’, ‘email.bounced’, ‘email.opened’, ‘email.clicked’. Must include at least one event.
string
required
The URL where webhook events will be sent. Must be a valid HTTPS endpoint.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_API_KEYRemove an existing API key from Resend. Use when you need to revoke or delete an API key.

Input Parameters

string
required
The API key ID to delete.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_AUDIENCERemove a segment using the legacy audience action and response shape.

Input Parameters

string
required
The ID of the audience to delete.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_AUTOMATIONRemove an existing automation from Resend using its automation ID.

Input Parameters

string
required
The ID of the automation (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_BROADCASTRemove an existing broadcast that is in draft status. Use this action to delete a draft broadcast from Resend.

Input Parameters

string
required
The Broadcast ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_CONTACTRemove a contact from the segment identified by audienceId, preserving the global contact. Uses the replacement segment-membership API so a legacy audience-scoped deletion does not also remove the contact from unrelated segments.

Input Parameters

string
The Contact ID. Either id or email must be provided.
string
The Contact email. Either id or email must be provided.
string
required
The segment ID (legacy audienceId parameter). Remove membership without deleting the global contact.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_CONTACT_BY_IDTool to remove an existing contact by its ID. Use when you need to delete a contact directly without specifying an audience.

Input Parameters

string
required
The Contact ID to delete.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_CONTACT_PROPERTYRemove an existing contact property from Resend.

Input Parameters

string
required
The Contact Property ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_DOMAINDelete a domain through the Resend Email API. Deletion is irreversible; ensure no active email traffic or DNS configurations depend on the domain before calling.

Input Parameters

string
required
The id of the domain to delete.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_EVENTDelete an existing Resend event using its event ID (UUID) or event name.

Input Parameters

string
required
The event ID (UUID) or event name.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_SEGMENTRemove an existing segment. Use when you need to permanently delete a segment by its ID.

Input Parameters

string
required
The ID of the segment to delete.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_SUPPRESSIONRemove a Resend suppression using its suppression ID or email address.

Input Parameters

string
required
The suppression ID or email address.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_TEMPLATERemove an existing template. Use this action when you need to delete a template from Resend.

Input Parameters

string
required
The Template ID or alias.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_TOPICDelete an existing Resend topic by its topic ID. OAuth connections require the full_access scope.

Input Parameters

string
required
The Topic ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DELETE_WEBHOOKRemove an existing webhook by ID. Use this to delete a webhook configuration when you no longer need to receive event notifications at that endpoint.

Input Parameters

string
required
The Webhook ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DUPLICATE_AUTOMATIONDuplicate an existing automation by its ID and return the new automation’s ID.

Input Parameters

string
required
The Automation ID (UUID) to duplicate.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DUPLICATE_BROADCASTCreate a new draft broadcast from an existing broadcast. Copies the segment, topic, sender, subject, reply-to, preview text, and content. The copy is named after the source with ” (copy)” appended, truncated to 70 characters.

Input Parameters

string
required
The Broadcast ID (UUID) to duplicate.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_DUPLICATE_TEMPLATEDuplicate an existing template through the Resend Email API. Use when you need to create a copy of an existing template.

Input Parameters

string
required
The Template ID or alias to duplicate.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_AUTOMATIONRetrieve a Resend automation by ID, including its active workflow steps and connections.

Input Parameters

string
required
The ID (UUID) of the automation.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_AUTOMATION_RUNRetrieve a Resend automation run by automation and run IDs, including its status and step executions in graph order.

Input Parameters

string
required
The ID (UUID) of the automation run.
string
required
The ID (UUID) of the automation.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_BROADCASTRetrieve a single broadcast by its ID. Use when you need to read back a broadcast’s content, recipient segment, schedule and status before sending it.

Input Parameters

string
required
The ID of the broadcast to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_CONTACTTool to retrieve a single contact from Resend by ID or email. Use when you need to get details of a specific contact using the global contacts endpoint.

Input Parameters

string
required
The Contact ID or email address to retrieve. Can be either a UUID (e.g., ‘e169aa45-1ecf-4183-9955-b1499d5701d3’) or an email address (e.g., ‘user@example.com’).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_CONTACT_IMPORTRetrieve a contact import by ID to check its status, timestamps, and processed row counts.

Input Parameters

string
required
The Contact Import ID (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_CONTACT_PROPERTYTool to retrieve a single contact property from Resend. Use when you need to get details about a specific contact property by its ID.

Input Parameters

string
required
The Contact Property ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_DOMAIN_CLAIMRetrieve the latest claim for a placeholder domain created by a claim. Returns the claim status, ownership-verification TXT record, and blocking or failure reasons. Supply the placeholder domain ID, not the claim ID.

Input Parameters

string
required
The ID of the placeholder domain created by the claim.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_EMAIL_ATTACHMENTRetrieve a single attachment from a sent email. Use when you need to access attachment metadata and download URL.

Input Parameters

string
required
The ID of the email.
string
required
The ID of the attachment.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_EMAIL_METRICSRetrieve account-level email metrics over a date range, with optional filters and dimension breakdowns. Use to analyze delivery, engagement, and rates; without dimensions the response contains totals only.

Input Parameters

array
Metrics to include. Defaults to all metrics; encoded as comma-separated query values.
array
Email UUIDs to filter by (up to 100). Cannot combine with broadcast dimension or broadcast_id.
string
ISO 8601 date or datetime; defaults to now. Future values are clamped to now.
string
IANA timezone for period buckets, e.g. America/New_York. Provider default: UTC.
array
Sending domain UUIDs to filter by (up to 100).
array
Breakdown dimensions. Email and broadcast cannot be combined. Defaults to no dimensions: totals only, no data.
string
ISO 8601 date or datetime on or before end_date; defaults to 6 days before end_date.
string ("hourly" | "daily" | "weekly" | "monthly")
Period bucket size; provider default daily. The range must not exceed 10,000 periods.
array
Broadcast UUIDs to filter by (up to 100). Cannot combine with email dimension or email_id.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_EVENTRetrieve a Resend event definition by UUID or event name. Use to inspect an event’s payload schema and creation/update timestamps.

Input Parameters

string
required
The event ID (UUID) or event name to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_LOGRetrieve a single Resend API log by its ID. Use to inspect a request’s endpoint, method, status, and request/response bodies.

Input Parameters

string
required
The ID (UUID) of the log to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_RECEIVED_EMAILRetrieve a single received email by ID, including its content, headers, recipients, and attachment metadata. Use for an inbound email, not a sent email.

Input Parameters

string
required
The ID of the received email.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_RECEIVED_EMAIL_ATTACHMENTRetrieve a single attachment from a received email, including its metadata and signed download URL. Use for an inbound email’s attachment.

Input Parameters

string
required
The ID of the received email.
string
required
The ID of the attachment.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_SEGMENTRetrieve a single segment by its ID. Use when you need to get detailed information about a specific segment.

Input Parameters

string
required
The ID of the segment to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_SUPPRESSIONRetrieve a Resend suppression by ID or email address. Use to inspect a suppressed address, its origin, source event, and creation time.

Input Parameters

string
required
The suppression ID or suppressed email address to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_TEMPLATERetrieve a single template by ID or alias from Resend. Use when you need to view template details.

Input Parameters

string
required
The Template ID or alias to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_TOPICTool to retrieve a single topic by its ID in Resend. Use when you need to fetch details of a specific topic.

Input Parameters

string
required
The Topic ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_USAGERetrieve the account’s current usage and plan limits for emails, contacts, segments, broadcasts, AI credits, automation runs, domains, and API requests. Use to check quota consumption and reset times.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_WEBHOOKRetrieve a single webhook for the authenticated user. Use this to get details about a specific webhook configuration including its endpoint, subscribed events, and signing secret.

Input Parameters

string
required
The Webhook ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_GET_WEBHOOK_EVENTRetrieve a single webhook event by webhook ID and event ID. Use to inspect its delivery status, next scheduled attempt, and event payload.

Input Parameters

string
required
The Webhook Event ID.
string
required
The Webhook ID (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_ALL_CONTACTSTool to retrieve a list of all contacts from Resend. Use when you need to fetch contacts across all audiences with optional pagination, or only the contacts of a single segment by passing segment_id.

Input Parameters

string
Pagination cursor - retrieves contacts after this ID (the ID itself is excluded). Cannot be used with ‘before’ parameter.
integer
Number of contacts to retrieve per request. Minimum 1, maximum 100. If not provided, defaults to 20.
string
Pagination cursor - retrieves contacts before this ID (the ID itself is excluded). Cannot be used with ‘after’ parameter.
string
Optional segment ID to filter by. When provided, only contacts belonging to this segment are returned; otherwise contacts across all segments are returned.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_API_KEYSTool to retrieve a list of API keys for the authenticated user. Use when you need to view all API keys associated with the account, including pagination support for large result sets.

Input Parameters

string
The ID after which we’ll retrieve more API keys (for pagination). This ID will not be included in the returned list. Cannot be used with the ‘before’ parameter.
integer
Number of API keys to retrieve. If omitted, all keys are returned in a single response.
string
The ID before which we’ll retrieve more API keys (for pagination). This ID will not be included in the returned list. Cannot be used with the ‘after’ parameter.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_AUDIENCESList segments using the legacy audience action and response shape.

Input Parameters

string
Cursor ID for forward pagination.
integer
Maximum number of results to return. Max: 100.
string
Cursor ID for backward pagination.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_AUTOMATION_RUNSRetrieve a page of runs for a Resend automation. Use to review run IDs, statuses, and timestamps, optionally filtering by comma-separated statuses. Use limit and cursor parameters to paginate through results.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return (1–100).
string
Return items before this cursor.
string
Filter runs by status. Comma-separated list of: running, completed, failed, cancelled.
string
required
The ID of the automation (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_AUTOMATIONSRetrieve a page of Resend automations. Use to find automation IDs and review names, statuses, and timestamps, optionally filtering by enabled or disabled status. Use limit and cursor parameters to paginate through results.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return (1–100).
string
Return items before this cursor.
string ("enabled" | "disabled")
Filter automations by status.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_BROADCAST_RECIPIENTSRetrieve a page of broadcast recipients filtered by a required event type. Use to inspect who received, opened, clicked, bounced, or otherwise interacted with a broadcast. Supports email substring filtering and cursor pagination.

Input Parameters

string
required
The Broadcast ID (UUID).
string ("sent" | "delivered" | "opened" | "clicked" | "bounced" | "complained" | "unsubscribed" | "suppressed")
required
The recipient event type to filter by.
string
Return items after this cursor.
string
Filter recipients whose email address contains this value.
integer
Number of items to return, from 1 to 100.
string
Return items before this cursor.
string ("permanent" | "transient" | "undetermined")
Filter by bounce type. Only valid when type is bounced.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_BROADCASTSTool to retrieve a list of broadcasts. Use when you need to fetch all broadcasts or paginate through them.

Input Parameters

string
The ID after which we’ll retrieve more broadcasts (for pagination). This ID will not be included in the returned list. Cannot be used with the before parameter.
integer
Number of broadcasts to retrieve. If not provided, all broadcasts will be returned.
string
The ID before which we’ll retrieve more broadcasts (for pagination). This ID will not be included in the returned list. Cannot be used with the after parameter.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_CONTACT_IMPORTSRetrieve a page of Resend contact imports, optionally filtered by status. Use to monitor import jobs and their row counts. Follow has_more with after or before cursors to retrieve additional pages.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return.
string
Return items before this cursor.
string ("queued" | "in_progress" | "completed" | "failed")
Filter contact imports by status.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_CONTACT_PROPERTIESTool to retrieve a list of contact properties from Resend. Use when you need to view available contact property definitions.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return.
string
Return items before this cursor.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_CONTACTSList contacts belonging to the segment identified by the legacy audienceId parameter.

Input Parameters

string
Cursor ID for forward pagination.
integer
Maximum number of results to return. Max: 100.
string
Cursor ID for backward pagination.
string
required
The segment ID (legacy audienceId parameter). Only contacts in this segment are returned.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_CONTACT_SEGMENTSRetrieve a list of segments that a contact is part of. Use when you need to determine which segments a specific contact belongs to.

Input Parameters

string
required
The ID of the contact.
string
Cursor ID for forward pagination.
integer
Maximum number of results to return. Max: 100.
string
Cursor ID for backward pagination.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_CONTACT_TOPICSRetrieve a list of topic subscriptions for a contact in Resend. Use when you need to check which topics a specific contact is subscribed to.

Input Parameters

string
Cursor ID for forward pagination.
integer
Maximum number of results to return. Max: 100.
string
Cursor ID for backward pagination.
string
required
The ID of the contact.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_DOMAINSList all domains. Use the returned domain IDs as inputs for tools like RESEND_VERIFY_DOMAIN that require a domain_id.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_EMAIL_ATTACHMENTSTool to retrieve a list of attachments from a sent email. Use when you need to get information about files attached to an email sent via Resend.

Input Parameters

string
Pagination cursor to fetch results after this attachment ID. Cannot be used with ‘before’.
integer
Maximum number of attachments to return. Use for pagination.
string
Pagination cursor to fetch results before this attachment ID. Cannot be used with ‘after’.
string
required
The ID of the email to retrieve attachments from.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_EMAILSTool to retrieve a list of emails sent by your team. Use when you need to fetch outbound emails from your account. Supports pagination with limit, after, and before parameters.

Input Parameters

string
Pagination cursor to fetch results after this email ID. Cannot be used with ‘before’.
integer
Maximum number of emails to return. Default 20, max 100, min 1.
string
Pagination cursor to fetch results before this email ID. Cannot be used with ‘after’.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_EVENTSRetrieve a page of Resend event definitions and their payload schemas. Use when discovering events available for automations, with optional cursor pagination. This lists event definitions, not emitted event occurrences.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return, from 1 to 100.
string
Return items before this cursor.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_LOGSRetrieve a page of Resend API request logs with optional cursor pagination. Use to inspect called endpoints, HTTP methods, response status codes, and user agents when investigating API activity.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return, from 1 to 100.
string
Return items before this cursor.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_RECEIVED_EMAIL_ATTACHMENTSRetrieve a paginated list of attachments for a received email, including metadata and signed download URLs. Use for an inbound email’s attachments.

Input Parameters

string
Pagination cursor to fetch results after this attachment ID. Cannot be used with ‘before’.
integer
Maximum number of attachments to return.
string
Pagination cursor to fetch results before this attachment ID. Cannot be used with ‘after’.
string
required
The ID of the received email.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_RECEIVED_EMAILSTool to retrieve a list of received emails for the authenticated user. Use when you need to fetch incoming emails from the receiving endpoint.

Input Parameters

string
Pagination cursor to fetch results after this email ID. Cannot be used with ‘before’.
integer
Maximum number of received emails to return.
string
Pagination cursor to fetch results before this email ID. Cannot be used with ‘after’.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_SEGMENTSRetrieve a page of Resend segments for audience management. Use the after or before cursor to paginate through available segments.

Input Parameters

string
Return items after this cursor for pagination.
integer
Number of items to return.
string
Return items before this cursor for pagination.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_SUPPRESSIONSRetrieve a page of suppressed email addresses from Resend, optionally filtered by bounce, complaint, or manual origin. Use after or before cursors to paginate results.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return.
string
Return items before this cursor.
string ("bounce" | "complaint" | "manual")
Filter suppressions by origin.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_TEMPLATESTool to retrieve a list of templates from Resend. Use when you need to get all available templates with optional pagination support.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return.
string
Return items before this cursor.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_TOPICSTool to retrieve a list of topics for the authenticated user. Use when you need to fetch available topics with optional pagination support.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return.
string
Return items before this cursor.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_WEBHOOK_EVENT_ATTEMPTSRetrieve a page of delivery attempts for an event on a Resend webhook, including HTTP status codes, response bodies, and send timestamps. Use when diagnosing webhook delivery failures. Pass the last attempt’s cursor as after to retrieve another page when has_more is true.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return, from 1 to 100.
string
required
The Webhook Event ID.
string
required
The Webhook ID (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_WEBHOOK_EVENTSRetrieve a page of events for a Resend webhook, including delivery status. Use when inspecting webhook deliveries. Pass the last event’s cursor as after to retrieve another page when has_more is true.

Input Parameters

string
Return items after this cursor.
integer
Number of items to return, from 1 to 100.
string
required
The Webhook ID (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_LIST_WEBHOOKSRetrieve a list of webhooks for the authenticated user. Use this to view all configured webhooks with their endpoints, event types, and status.

Input Parameters

string
Pagination cursor to fetch results after this webhook ID. Cannot be used with ‘before’.
integer
Maximum number of webhooks to return.
string
Pagination cursor to fetch results before this webhook ID. Cannot be used with ‘after’.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_PUBLISH_TEMPLATEPublish a template through the Resend Email API. Use when you need to make a template publicly available.

Input Parameters

string
required
The Template ID or alias to publish.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_REMOVE_CONTACT_FROM_SEGMENTRemove an existing contact from a segment. Use when you need to disassociate a contact from a specific segment.

Input Parameters

string
required
The ID of the contact to remove from the segment.
string
required
The ID of the segment to remove the contact from.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_REPLAY_WEBHOOK_EVENTQueue one more delivery of an event to an enabled webhook. The event must be retrievable through Get Webhook Event. A disabled webhook returns a 422 validation_error. A manual replay does not schedule automatic retries; a successful response means delivery was queued, not completed.

Input Parameters

string
required
The Webhook Event ID to replay.
string
required
The Webhook ID (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_RETRIEVE_AUDIENCERetrieve a segment using the legacy audience action and response shape.

Input Parameters

string
required
The ID of the audience to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_RETRIEVE_CONTACTRetrieve a global contact by ID. The legacy audienceId input is retained for compatibility.

Input Parameters

string
required
The Contact ID.
string
required
Legacy audience ID retained for compatibility. Contacts are now global and retrieved by id.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_RETRIEVE_DOMAINRetrieve a single domain.

Input Parameters

string
required
The id of the domain to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_RETRIEVE_EMAILRetrieve a single email.

Input Parameters

string
required
The id of the email to retrieve.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_SEND_BATCH_EMAILSTrigger up to 100 batch emails at once. Use when you need to send multiple emails in a single API request.

Input Parameters

array
required
List of email items to send in batch. Maximum 100 emails per batch.
string
A unique identifier for the request to ensure emails are only sent once.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_SEND_BROADCASTSend an existing Resend broadcast immediately or schedule it for a later ISO 8601 date. Use after creating and preparing the broadcast for delivery to its recipients.

Input Parameters

string
required
The Broadcast ID to send.
string
Schedule the broadcast to be sent later. The date should be in ISO 8601 format. Omit to send immediately.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_SEND_EMAILSend an email using Resend. Confirm recipients and content with the user before invoking — sends are irreversible. All recipients must be listed explicitly via to, cc, or bcc; audience-based sending is unsupported. Render HTML or plain text externally before passing via html or text.

Input Parameters

string
Cc recipient email address. For multiple addresses, send as an array of strings.
string
required
Recipient email address. For multiple addresses, send as an array of strings. Max 50.
string
Bcc recipient email address. For multiple addresses, send as an array of strings. Use bcc instead of to when sending to multiple recipients to prevent them from seeing each other’s addresses.
string
required
Sender email address. To include a name, use the format ‘Your Name <sender@domain.com>’.
string
The HTML version of the message. At least one of ‘html’ or ‘text’ must be provided.
string
The plain text version of the message. At least one of ‘html’ or ‘text’ must be provided.
string
The React version of the message. Only available in the Node.js SDK.
object
Custom headers to add to the email. Must be a dictionary/object with key-value pairs (e.g., {‘X-Custom-Header’: ‘value’}). Pass None or omit to exclude.
string
required
Email subject.
string
Reply-to email address. For multiple addresses, send as an array of strings.
string
Schedule email to be sent later. The date should be in ISO 8601 format (e.g., ‘2024-08-05T11:52:01.858Z’).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_SEND_EVENTSend an event associated with a contact ID or email, with an optional payload. Triggers matching enabled automations, which can send emails or modify contacts according to their configured steps.

Input Parameters

string
The email address to associate with this event. Exactly one of contact_id or email must be provided.
string
required
The name of the event to send.
object
An optional payload of key/value pairs to include with the event.
string
The UUID of the contact to associate with this event. Exactly one of contact_id or email must be provided.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_SHARE_EMAILCreate a shareable link for a sent or received Resend email. Use its email ID and optionally set a link lifetime of up to 48 hours; omitted expiry defaults to 48 hours.

Input Parameters

string
required
The ID of the email.
string
How long the shareable link stays valid, as a duration like ‘10m’, ‘2 hours’, or ‘1 day’. Defaults to ‘48h’ when omitted and cannot exceed 48 hours.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_STOP_AUTOMATIONStop an automation by its ID and return its status after stopping.

Input Parameters

string
required
The UUID of the automation to stop.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_AUTOMATIONUpdate a Resend automation’s name, status, or workflow graph. Use for an existing automation; supply at least one update. To replace the workflow graph, provide both steps and connections together.

Input Parameters

string
The new automation name. Omitted or null leaves it unchanged.
array
Replacement workflow steps (1–150). Must be provided with connections; null is omitted.
string ("enabled" | "disabled")
The automation status. Omitted or null leaves it unchanged.
array
Replacement graph connections, provided together with steps; null is omitted.
string
required
The ID of the automation (UUID).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_BROADCASTUpdate an existing broadcast in Resend. Use when you need to modify broadcast details like name, subject, content, or recipients.

Input Parameters

string
required
The Broadcast ID to update.
string
The email address of the sender.
string
The HTML version of the message.
string
Name of the broadcast.
string
The plain text version of the message.
string
The subject line of the email.
array
The email addresses to which replies should be sent.
string
Unique identifier of the segment this broadcast will be sent to.
string
Unique identifier of the audience this broadcast will be sent to.
string
The preview text of the email.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_CONTACTTool to update an existing contact in Resend by ID or email. Use when you need to modify contact details such as name or subscription status.

Input Parameters

string
The last name of the contact.
string
The first name of the contact.
string
required
The Contact ID or email address to update. Can be either the unique contact ID (UUID format) or the contact’s email address.
boolean
The subscription status of the contact. When true, unsubscribes the contact from all broadcasts.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_CONTACT_PROPERTYUpdate an existing contact property in Resend. Only the fallback_value can be updated; the key and type fields cannot be changed after creation.

Input Parameters

string
The default value to use when the property is not set for a contact. Must match the type specified in the contact property’s type field. Can be a string or number.
string
required
The Contact Property ID to update.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_CONTACT_TOPICSUpdate topic subscriptions for a Resend contact by ID or email address. Use to opt a contact in to or out of specific topics.

Input Parameters

array
required
Topic subscriptions to update for the contact.
string
required
The Contact ID or email address.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_DOMAINUpdate an existing domain’s click tracking, open tracking, and TLS settings. Omitted settings are sent as disabled tracking and opportunistic TLS.

Input Parameters

string ("opportunistic" | "enforced")
TLS setting for email communication. ‘opportunistic’: Always attempts to make a secure connection. ‘enforced’: Requires TLS for email communication.
string
required
The id of the domain to update.
boolean
Track the open rate of each email.
boolean
Track clicks within the body of each HTML email.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_DRAFT_BROADCASTUpdate a broadcast that is still an unsent draft. Use when you need to revise a staged campaign; the broadcast is read back first and the update is refused unless its status is ‘draft’ and it has no scheduled send time.

Input Parameters

string
The sender email address. To include a friendly name, use the format ‘Your Name <sender@domain.com>’.
string
The HTML version of the message.
string
The friendly name of the broadcast. Only used for internal reference.
string
The plain text version of the message.
string
The subject line of the email.
array
The email addresses to which replies should be sent.
string
The ID of the topic the broadcast will be scoped to.
string
The ID of the segment the broadcast will be addressed to.
string
required
The ID of the draft broadcast to update.
string
The preview text shown by email clients.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_EMAILUpdate the scheduled send time of a scheduled email by ID.

Input Parameters

string
required
The ID of the email to update.
string
required
Schedule email to be sent later. The date should be in ISO 8601 format (e.g: 2024-08-05T11:52:01.858Z).

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_EVENTUpdate a Resend event definition’s payload schema by UUID or event name. Supply a flat key/type map to replace the schema, or null to clear it. This updates the event definition; it does not emit an event.

Input Parameters

string
required
A flat key/type map defining the event payload schema. Supported types are string, number, boolean, and date. Set to null to clear the schema.
string
required
The event ID (UUID) or event name to update.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_SEGMENTUpdate an existing segment in Resend. Use when you need to rename a segment identified by its Segment ID.

Input Parameters

string
required
The Segment ID to update.
string
required
The new name of the segment.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_TEMPLATETool to update an existing email template in Resend. Use when you need to modify template properties such as name, subject, HTML content, or variables.

Input Parameters

string
required
The Template ID or alias to update.
string
Sender email address. To include a friendly name, use the format “Your Name <sender@domain.com>”.
string
The HTML version of the template.
string
The name of the template.
string
The plain text version of the template.
string
The alias of the template.
string
Email subject.
array
Reply-to email addresses.
array
Template variables with their types and optional fallback values.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_TOPICTool to update an existing topic in Resend. Use when you need to modify the name of a topic.

Input Parameters

string
required
The Topic ID to update.
string
required
The name of the topic to update.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_UPDATE_WEBHOOKTool to update an existing webhook configuration. Use when you need to modify the endpoint URL, change event subscriptions, or enable/disable a webhook.

Input Parameters

array
Array of event types to subscribe to. Must contain at least one event if provided.
string ("enabled" | "disabled")
The status of the webhook. Set to ‘enabled’ to activate or ‘disabled’ to deactivate.
string
The URL where webhook events will be sent.
string
required
The ID of the webhook to update.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_VERIFY_DOMAINVerify a domain through the Resend Email API. DNS records must fully propagate before verification succeeds; avoid immediate retries after DNS setup.

Input Parameters

string
required
The id of the domain to verify. Must match an existing registered domain; use RESEND_LIST_DOMAINS to retrieve valid IDs.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: RESEND_VERIFY_DOMAIN_CLAIMTrigger asynchronous DNS verification and ownership transfer for a domain claim. Add the claim’s TXT record to DNS first. Supply the placeholder domain ID, not the claim ID. The claim stays pending while verification runs; poll RESEND_GET_DOMAIN_CLAIM for status. Once completed, add the transferred domain’s new DKIM records to DNS and verify them with RESEND_VERIFY_DOMAIN.

Input Parameters

string
required
The ID of the placeholder domain created by the claim, not the claim ID.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not