- Category: developer tools
- Auth: OAUTH2, API_KEY
- Composio-managed OAuth available? No
- Tools: 414
- Triggers: 0
- Slug:
VERCEL - Version: 20261101_00
Tools
Returns activated WAF config
Returns activated WAF config
Create System Bypass Rule
Create System Bypass Rule
Add Environment Variable
Add Environment Variable
VERCEL_ADD_ENVIRONMENT_VARIABLETool to add an environment variable to a Vercel project. Variables only take effect in subsequent deployments — already-running deployments are not updated. Use after confirming the project exists and you need to configure secrets or configuration values across environments before deployment. Example: “Add API_KEY=secret to production”.Input Parameters
Output
Add Domain to Project
Add Domain to Project
VERCEL_ADD_PROJECT_DOMAINTool to attach a custom domain to a Vercel project. Use when you need to add a domain to a project for production or branch-specific deployments. After adding, the domain must be verified by completing the verification challenges returned in the response.Input Parameters
Output
Adds a new member to a project.
Adds a new member to a project.
Add a repository permission
Add a repository permission
Add a routing rule
Add a routing rule
Aggregates custom events
Aggregates custom events
VERCEL_AGGREGATE_EVENTSAggregates custom events. Counts custom events on a project, within the requested date range. Results are either aggregated or broken down over time. Results can additionally be broken down by one dimension, and filtered by multiple dimensions.Input Parameters
Output
Aggregate Page Views
Aggregate Page Views
Update the active rolling release to the next stage for a project
Update the active rolling release to the next stage for a project
Archive AI Gateway budget
Archive AI Gateway budget
Archive AI Gateway budget default
Archive AI Gateway budget default
Assign Alias to Deployment
Assign Alias to Deployment
VERCEL_ASSIGN_ALIASTool to assign an alias to a specific Vercel deployment. Use when you need to associate a custom domain or subdomain with a deployment.Input Parameters
Output
Batch Remove Project Environment Variables
Batch Remove Project Environment Variables
VERCEL_BATCH_REMOVE_PROJECT_ENVTool to batch remove environment variables from a Vercel project. Use when you need to delete multiple environment variables at once. More efficient than deleting variables one by one when removing multiple variables.Input Parameters
Output
Buy Domains
Buy Domains
VERCEL_BUY_DOMAINSTool to purchase multiple domains through Vercel’s domain registrar. Use when registering new domains after checking availability and price. Important: Always check domain availability and price before attempting purchase. Some TLDs may require additional contact information fields.Input Parameters
Output
Buy Single Domain
Buy Single Domain
VERCEL_BUY_SINGLE_DOMAINTool to purchase a domain through Vercel’s domain registrar. Use when you need to register and buy a domain after confirming availability and pricing.Input Parameters
Output
Cancel a deployment
Cancel a deployment
VERCEL_CANCEL_DEPLOYMENTCancel a deployment. Cancels a deployment that is currently in progress, stopping the build before it completes. Use this to recover quickly from accidental deploys, wrong-branch pushes, or builds with known errors — without waiting for them to finish. Returns 400 if the deployment is no longer cancelable (already READY, ERROR, or CANCELED). Returns the updated deployment object with readyState: 'CANCELED' on success.Input Parameters
Output
Cancel a blob upload
Cancel a blob upload
Check Artifact Exists
Check Artifact Exists
Check Domain Availability
Check Domain Availability
VERCEL_CHECK_DOMAIN_AVAILABILITYTool to check if a domain is available for registration. Read-only: does not reserve or purchase the domain. Use when you need to verify domain availability before purchase. Response field available=false means the domain is taken (not an error); actual failures return HTTP 4xx. IMPORTANT: Vercel only supports specific TLDs. Common supported TLDs include: .com, .net, .org, .io, .co, .dev, .app, .ai, .xyz, .me. Some TLDs are NOT supported (e.g., .cam, .berlin, .wales). For the full list, see: https://vercel.com/docs/domains/supported-domainsInput Parameters
Output
Check Domain Price (Deprecated)
Check Domain Price (Deprecated)
Check Domain Price
Check Domain Price
VERCEL_CHECK_DOMAIN_PRICE2Check pricing for a domain including purchase, renewal, and transfer costs. Use this to evaluate the cost of registering, renewing, or transferring a domain via Vercel. Returns pricing for the specified domain and time period.Input Parameters
Output
Check if a blob exists
Check if a blob exists
Check if a manifest exists
Check if a manifest exists
VERCEL_CHECK_REGISTRY_MANIFESTCheck if a manifest exists. HEAD /v2/:teamSlug/:projectSlug/:repositoryName/manifests/:reference Check whether a manifest exists. Used by Docker client during push to determine if a manifest (or config blob referenced by digest) is already present.Input Parameters
Output
Check registry API version support
Check registry API version support
Claim Domain Ownership
Claim Domain Ownership
VERCEL_CLAIM_DOMAIN_OWNERSHIPClaim Domain Ownership. Claim ownership of a domain for the authenticated team by verifying a TXT record. The caller must first add a TXT record to _vercel.{domain} (obtained from GET /domains/:domain/verification), then call this endpoint to complete the ownership transfer. If the TXT record is verified, the domain ownership will be transferred to the caller’s team, even if the domain is currently owned by another user or team.Input Parameters
Output
Clear all repository permissions
Clear all repository permissions
VERCEL_CLEAR_REPOSITORY_PERMISSIONSClear all repository permissions. Revoke every team’s access to a VCR repository. Clearing an unshared repository is a no-op.Input Parameters
Output
Complete a blob upload
Complete a blob upload
VERCEL_COMPLETE_REGISTRY_BLOB_UPLOADComplete a blob upload. PUT /v2/:teamSlug/:projectSlug/:repositoryName/blobs/uploads/:uuid?digest=<digest> Complete the blob upload. This may include a final chunk of data in the request body (monolithic upload) or just finalize a previous chunked upload.Input Parameters
Output
Complete the rolling release for the project
Complete the rolling release for the project
Connect Blob Store
Connect Blob Store
Connect integration resource to project
Connect integration resource to project
VERCEL_CONNECT_INTEGRATION_RESOURCE_TO_PROJECTConnect integration resource to project. Connects an integration resource to a Vercel project. This endpoint establishes a connection between a provisioned integration resource (from storage APIs like POST /v1/storage/stores/integration/direct) and a specific Vercel project.Input Parameters
Output
Counts custom events
Counts custom events
VERCEL_COUNT_EVENTSCounts custom events. Counts the number of custom events on a project (production only), since Web Analytics was enabled. Results can be filtered on supported dimensions.Input Parameters
Output
Counts page views
Counts page views
VERCEL_COUNT_PAGEVIEWSCounts page views. Counts the number of page views on a project (production only), since Web Analytics was enabled. Results can be filtered on supported dimensions.Input Parameters
Output
Creates an access group
Creates an access group
Create an access group project
Create an access group project
Create rule
Create rule
Create virtual model config
Create virtual model config
VERCEL_CREATE_AI_GATEWAY_VIRTUAL_MODEL_CONFIGCreate virtual model config. Create a virtual model config (VMC)Input Parameters
{ slug, ...attributes }. For kind=alias: ordered fallback model slugs, optionally led by one conditional { model, when } entry, used when the primary model’s answers match when.Output
Create Auth Token
Create Auth Token
VERCEL_CREATE_AUTH_TOKENTool to create a new authentication token. Use when you need to programmatically generate a new auth token with optional expiration. Returns both token metadata and the bearer token value (only provided once).Input Parameters
Output
Create Blob Store
Create Blob Store
VERCEL_CREATE_BLOB_STORECreate a Vercel Blob store, optionally associated with a project.Input Parameters
Output
Create conditional firewall bypass
Create conditional firewall bypass
Create a custom environment for the current project.
Create a custom environment for the current project.
Create Deployment
Create Deployment
VERCEL_CREATE_DEPLOYMENTDEPRECATED: Use VERCEL_CREATE_NEW_DEPLOYMENT instead. Create a new deployment on Vercel. Deploys static files or connects to a Git repository. File-based deployments: Provide name and files array with file content (inline HTML/CSS/JS). Git-based deployments: Provide name and gitSource with repository details. IMPORTANT: Always provide either slug (team slug) or teamId (team ID starting with ‘team_’) to specify the team context. Use VERCEL_GET_TEAMS to find the correct team slug. Example minimal file deployment: { “name”: “my-project”, “slug”: “my-team”, “files”: [{“file”: “index.html”, “data”: “<html><body>Hello World</body></html>”}] }Input Parameters
staging, production, or a custom environment identifier. If staging, a staging alias in the format <project>-<team>.vercel.app will be assigned. If production, any aliases defined in alias will be assigned. If omitted, the target will be preview.null is used no monorepo manager is selectedtrue and deploymentId is passed in, the sha from the previous deployment’s gitSource is removed forcing the latest commit to be used.Output
Create a check run
Create a check run
Create DNS Record
Create DNS Record
VERCEL_CREATE_DNS_RECORDTool to create a new DNS record for a domain. Use when you need to add DNS records such as A, AAAA, CNAME, MX, TXT, SRV, or other record types to a domain managed in Vercel.Input Parameters
Output
Create Edge Config
Create Edge Config
VERCEL_CREATE_EDGE_CONFIGCreates a new Edge Config for storing key-value data at the edge. Edge Configs enable ultra-low latency data reads from Vercel’s edge network. Use this to store feature flags, A/B test configurations, or other data that needs to be read quickly from edge functions.Input Parameters
Output
Create Edge Config Token
Create Edge Config Token
VERCEL_CREATE_EDGE_CONFIG_TOKENCreate a read access token for a specific Edge Config. The generated token is used to authenticate against the Edge Config’s endpoint for high-volume, low-latency read operations. Use this when you need to grant read access to an Edge Config from your application.Input Parameters
Output
Create a flag
Create a flag
VERCEL_CREATE_FLAGCreate a flag. Create a new feature flag for a project. The flag must have a unique slug within the project and specify its kind (boolean, string, number, or json).Input Parameters
Output
Create a segment
Create a segment
Create integration store (free and paid plans)
Create integration store (free and paid plans)
VERCEL_CREATE_INTEGRATION_STORE_DIRECTCreate integration store (free and paid plans). Creates an integration store with automatic billing plan handling. For free resources, omit billingPlanId to auto-discover free plans. For paid resources, provide a billingPlanId from the billing plans endpoint.Input Parameters
Output
Create a microfrontends group with applications
Create a microfrontends group with applications
Create a Secure Compute network
Create a Secure Compute network
Create new deployment
Create new deployment
VERCEL_CREATE_NEW_DEPLOYMENTTool to create a new deployment. Use when you need to deploy files or a Git commit to a Vercel project. Example for file deployment: { “name”: “my-app”, “files”: [ {“file”: “index.html”, “data”: “<html><body>Hello World</body></html>”}, {“file”: “style.css”, “data”: “body { font-family: Arial; }”} ], “target”: “production” } Example for Git source deployment (deploy from GitHub branch - uses latest commit): { “name”: “my-app”, “gitSource”: { “type”: “github”, “repoId”: “668449998”, “ref”: “main” } } Example for Git source deployment (deploy specific commit): { “name”: “my-app”, “gitSource”: { “type”: “github”, “repoId”: “668449998”, “ref”: “main”, “sha”: “a1b2c3d4e5f6g7h8i9j0” } } Note: repoId must be the numeric GitHub repository ID (NOT ‘owner/repo’). Get it via: GET https://api.github.com/repos/{owner}/{repo} -> use the ‘id’ field. Example for redeployment: { “deploymentId”: “dpl_Br7FSrRXuUkSHj7t7GVVadyuGvFg”, “target”: “production” }Input Parameters
Output
Query Observability Metrics
Query Observability Metrics
VERCEL_CREATE_OBSERVABILITY_QUERYQuery Vercel observability metrics with aggregations, filters, and time bounds.Input Parameters
Output
Create or Transfer Domain
Create or Transfer Domain
VERCEL_CREATE_OR_TRANSFER_DOMAINTool to add an existing domain to the Vercel platform. Use when you need to add a domain to Vercel for DNS management or transfer a domain. Supports two methods: ‘add’ for adding existing domains and ‘move-in’ for transferring domains (requires authorization token).Input Parameters
Output
Create a PrivateLink endpoint
Create a PrivateLink endpoint
VERCEL_CREATE_PRIVATE_LINK_ENDPOINTCreate a PrivateLink endpoint. Creates a PrivateLink endpoint for a project. Changes to endpoints of the same project are serialized. If another change holds them for too long, the request fails with 503 service_unavailable and can be retried. If the change may have completed but the outcome is unknown, it fails with 409 uncertain_outcome; read the endpoint before retrying.Input Parameters
vercelRegion, the service must allow cross-region access.privateDnsNames. Defaults to false, in which case the endpoint is reachable through the DNS names in awsDnsEntries.Output
Create Vercel Project (Deprecated)
Create Vercel Project (Deprecated)
VERCEL_CREATE_PROJECTDEPRECATED: Use VERCEL_VERCEL_CREATE_PROJECT2 instead. Tool to create a new Vercel project. Use when automating project provisioning in CI/CD before deployment. Project names must be unique per team; duplicate names cause 409 conflicts — check for existing projects first.Input Parameters
Output
Create Vercel Project (v2)
Create Vercel Project (v2)
VERCEL_CREATE_PROJECT2Tool to create a new Vercel project with comprehensive configuration options. Use when you need to create a project with specific settings like environment variables, framework selection, Git repository connection, resource configuration, or deployment policies.Input Parameters
Output
Create a check
Create a check
Create Project Environment Variables (Deprecated)
Create Project Environment Variables (Deprecated)
VERCEL_CREATE_PROJECT_ENVDEPRECATED: Use VERCEL_ADD_ENVIRONMENT_VARIABLE instead. Tool to create environment variables in a Vercel project. Use when you need to configure secrets or configuration values across environments.Input Parameters
Output
Create Project Transfer Request
Create Project Transfer Request
Create a repository
Create a repository
Create a directory
Create a directory
VERCEL_CREATE_SESSION_DIRECTORYCreate a directory. Creates a new directory in a session’s filesystem. By default, parent directories are created recursively if they don’t exist (similar to mkdir -p).Input Parameters
mkdir -p). If false, fails if parent directories do not exist.Output
Create a snapshot
Create a snapshot
VERCEL_CREATE_SESSION_SNAPSHOT_V2Create a snapshot. Creates a point-in-time snapshot of a running session’s filesystem. Snapshots can be used to quickly restore a session to a previous state or to create new sessions with pre-configured environments. The session must be running and able to accept commands for a snapshot to be created. The session will be terminated after the snapshot is created.Input Parameters
Output
Create a snapshot
Create a snapshot
VERCEL_CREATE_SESSION_SNAPSHOT_V3Create a snapshot. Creates a point-in-time snapshot of a running session’s filesystem. Snapshots can be used to quickly restore a session to a previous state or to create new sessions with pre-configured environments. The session must be running and able to accept commands for a snapshot to be created. The session will be terminated after the snapshot is created. Unlike v2, snapshots expire after 7 days when neither the request nor the sandbox configuration specifies an expiration.Input Parameters
Output
Set Speed Insights Enabled
Set Speed Insights Enabled
Create a Team
Create a Team
Start an asynchronous Vercel CI task analysis
Start an asynchronous Vercel CI task analysis
Create Webhook
Create Webhook
VERCEL_CREATE_WEBHOOKTool to create a webhook for receiving notifications about Vercel events. Use when you need to set up automated responses to deployment, domain, project, or other Vercel events.Input Parameters
Output
Set Web Analytics Enabled
Set Web Analytics Enabled
Dangerously Delete By Source Images
Dangerously Delete By Source Images
VERCEL_DANGEROUSLY_DELETE_BY_SRC_IMAGESTool to dangerously delete edge cache by source image URLs. Use when you need to invalidate cached images from the edge network for a specific project.Input Parameters
Output
Deletes an access group
Deletes an access group
Delete an access group project
Delete an access group project
Delete rule
Delete rule
Delete virtual model config
Delete virtual model config
Delete virtual model config
Delete virtual model config
Delete Vercel Alias
Delete Vercel Alias
Delete all cache artifacts
Delete all cache artifacts
VERCEL_DELETE_ALL_ARTIFACTSDelete all cache artifacts. Targets an explicit team_id or the configured connection context, clearing the Remote Cache. Team slug inputs are not supported. Subsequent builds will re-populate the cache.Input Parameters
Output
Delete Auth Token
Delete Auth Token
VERCEL_DELETE_AUTH_TOKENTool to delete an authentication token. Use when you need to revoke a token programmatically after confirming its validity. Example: “Delete auth token with id abc123”Input Parameters
Output
Delete conditional firewall bypass
Delete conditional firewall bypass
Delete an integration configuration
Delete an integration configuration
Delete a connector
Delete a connector
Disconnect a connector from a project
Disconnect a connector from a project
Purge All Data Cache
Purge All Data Cache
Delete Deployment (V2)
Delete Deployment (V2)
VERCEL_DELETE_DEPLOYMENTPermanently delete a Vercel deployment by its ID or URL. Use this action to remove a deployment from Vercel. The deployment can be identified either by its unique deployment ID (e.g., ‘dpl_xxx’) or by providing the deployment URL as a query parameter. Note: This action is destructive and cannot be undone. The deployment will be permanently removed. Do not target the latest production deployment. When filtering deployments by branch or status before deletion, use meta.githubCommitRef for branch and readyState for status — misreading these fields can cause unintended deletions.Input Parameters
Output
Delete DNS Record
Delete DNS Record
VERCEL_DELETE_DNS_RECORDTool to delete a DNS record from a domain. Use when you need to remove an existing DNS record by its record ID and domain name.Input Parameters
Output
Delete Domain
Delete Domain
Delete a drain
Delete a drain
Delete a drive
Delete a drive
VERCEL_DELETE_DRIVEDelete a drive. Deletes a drive by project and name. Attached drives cannot be deleted. Stop or replace the session currently using the drive before retrying deletion.Input Parameters
Output
Delete Edge Config
Delete Edge Config
Delete a Global Config's schema
Delete a Global Config's schema
Delete Edge Config Tokens (v2)
Delete Edge Config Tokens (v2)
VERCEL_DELETE_EDGE_CONFIG_TOKENSTool to delete one or more Edge Config tokens. Use when you need to revoke access tokens from an Edge Config. Note: The tokens array must contain the actual token values, not token IDs.Input Parameters
Output
Delete a flag
Delete a flag
Delete a segment
Delete a segment
Delete a microfrontends group
Delete a microfrontends group
Delete a Secure Compute network
Delete a Secure Compute network
Delete a PrivateLink endpoint
Delete a PrivateLink endpoint
VERCEL_DELETE_PRIVATE_LINK_ENDPOINTDelete a PrivateLink endpoint. Deletes a PrivateLink endpoint. The endpoint is removed asynchronously. Repeating the request for an endpoint that is already being deleted retries its cleanup and also returns 204. Changes to endpoints of the same project are serialized. If another change holds them for too long, the request fails with 503 service_unavailable and can be retried. If the change may have completed but the outcome is unknown, it fails with 409 uncertain_outcome; read the endpoint before retrying.Input Parameters
Output
Delete Vercel Project (v2)
Delete Vercel Project (v2)
Delete a project avatar
Delete a project avatar
Delete a check
Delete a check
Remove Project Environment Variable
Remove Project Environment Variable
Delete project-level redirects.
Delete project-level redirects.
VERCEL_DELETE_REDIRECTSDelete project-level redirects.. Deletes the provided redirects from the latest version of the projects’ bulk redirects. Stages a new change with the new redirects and returns the alias for the new version in the response.Input Parameters
Output
Delete a blob
Delete a blob
Delete an image manifest
Delete an image manifest
Delete a repository
Delete a repository
VERCEL_DELETE_REPOSITORYDelete a repository. Schedule a repository for deletion. The repository is marked so it disappears from list/get immediately; subscriber-vcr reclaims every image (manifests, blobs, tags and rows) and finally deletes the repository row asynchronously via the VcrRepositoryRemoved event.Input Parameters
Output
Delete a repository image
Delete a repository image
VERCEL_DELETE_REPOSITORY_IMAGEDelete a repository image. Schedule an image for deletion. The image is marked so it disappears from list/get immediately; subscriber-vcr reclaims the manifest, blobs, tags and row asynchronously via the VcrManifestRemoved event.Input Parameters
Output
Delete Rolling Release Configuration
Delete Rolling Release Configuration
VERCEL_DELETE_ROLLING_RELEASE_CONFIGTool to delete rolling release configuration for a project. Use when you need to remove or disable rolling release configuration from a Vercel project.Input Parameters
Output
Delete routing rules
Delete routing rules
Delete a sandbox
Delete a sandbox
VERCEL_DELETE_SANDBOXDelete a sandbox. Deletes a sandbox by name. If sandboxes are currently running, they will be stopped first. This operation deletes all sandbox entities with the given name and the named sandbox metadata. When the config item is already missing, the returned sandbox uses stored metadata and defaults; config fields may be stale.Input Parameters
Output
Delete draft WAF configuration
Delete draft WAF configuration
Delete a snapshot
Delete a snapshot
Delete a Blob store
Delete a Blob store
Delete Vercel Webhook
Delete Vercel Webhook
VERCEL_DELETE_WEBHOOKDelete a webhook by its unique ID to stop receiving event notifications. This action permanently removes the webhook configuration. Use VERCEL_GET_WEBHOOKS to find webhook IDs if needed. The deletion is idempotent - deleting an already deleted webhook returns a 404 error.Input Parameters
Output
Download Cache Artifact
Download Cache Artifact
VERCEL_DOWNLOAD_ARTIFACTDownload a cache artifact from Vercel’s Remote Cache by its hash. Use this to retrieve previously cached build artifacts generated by Turborepo or other build systems. Remote Caching must be enabled for the team. Returns a tar.gz compressed file.Input Parameters
Output
Download a blob
Download a blob
Pull an image manifest
Pull an image manifest
Edit Project Environment Variable
Edit Project Environment Variable
VERCEL_EDIT_PROJECT_ENVTool to edit an environment variable in a Vercel project. Use when you need to update an existing environment variable’s value, type, target environments, or other properties. Requires both the project identifier and the environment variable ID.Input Parameters
Output
Edit a project-level redirect.
Edit a project-level redirect.
VERCEL_EDIT_REDIRECTEdit a project-level redirect.. Edits a single redirect identified by its source path. Stages a new change with the modified redirect and returns the alias for the new version in the response.Input Parameters
Output
Edit a routing rule
Edit a routing rule
Eject a managed connector
Eject a managed connector
Execute Sandbox Command
Execute Sandbox Command
Extend session timeout
Extend session timeout
VERCEL_EXTEND_SESSION_TIMEOUTExtend session timeout. Extends the maximum execution time of a running session. The session must be active and able to accept commands. The total timeout cannot exceed the maximum allowed limit for your account.Input Parameters
Output
Filter Project Environment Variables
Filter Project Environment Variables
VERCEL_FILTER_PROJECT_ENVSTool to retrieve environment variables of a Vercel project by id or name. Use when you need to list and filter environment variables for a specific project.Input Parameters
Output
Fork a drive
Fork a drive
VERCEL_FORK_DRIVEFork a drive. Fork the provided drive into a new one with the provided name, inheriting the region and max size.Input Parameters
Output
Fork a named sandbox
Fork a named sandbox
VERCEL_FORK_SANDBOX_V2Fork a named sandbox. Forks a named sandbox, creating a new named sandbox from the source’s configuration. Resources, timeout, ports, tags, network policy, mounts, Connect network, image, persistence, snapshot settings and — unlike the SDK-side fork — environment variables are copied from the source automatically (interactive is not). When the source has a snapshot the fork starts from it; otherwise it starts from the source’s runtime/image. Any field provided in the request body overrides the value copied from the source.Input Parameters
Output
Fork a named sandbox
Fork a named sandbox
VERCEL_FORK_SANDBOX_V3Fork a named sandbox. Forks a named sandbox, creating a new named sandbox from the source’s configuration. Resources, timeout, ports, tags, network policy, mounts, Connect network, image, persistence, snapshot settings and — unlike the SDK-side fork — environment variables are copied from the source automatically (interactive is not). When the source has a snapshot the fork starts from it; otherwise it starts from the source’s runtime/image. Any field provided in the request body overrides the value copied from the source. Unlike v2, when neither the body nor the source provides a value, snapshots expire after 7 days by default and persistent sandboxes keep only their most recent snapshot (keepLastSnapshots: null disables the limit).Input Parameters
Output
Generate a firewall rule from natural language
Generate a firewall rule from natural language
Generate a routing rule from natural language
Generate a routing rule from natural language
Get Active Attack Status
Get Active Attack Status
Get virtual model config
Get virtual model config
Get virtual model config
Get virtual model config
Get Vercel Alias
Get Vercel Alias
Get All Log Drains
Get All Log Drains
Query Artifact Information
Query Artifact Information
Get Auth Token Metadata
Get Auth Token Metadata
VERCEL_GET_AUTH_TOKENTool to retrieve metadata for an authentication token. Use when you need to inspect details of a specific token or get information about the current token being used.Input Parameters
Output
Get Authenticated User
Get Authenticated User
List integration billing plans
List integration billing plans
VERCEL_GET_BILLING_PLANSList integration billing plans. Get a list of billing plans for an integration and product.Input Parameters
Output
Get Bulk Domain Availability
Get Bulk Domain Availability
VERCEL_GET_BULK_AVAILABILITYTool to check availability for multiple domains at once. Use when you need to verify availability of multiple domain names efficiently in a single request. Supports checking up to 50 domains per request. Only domains with Vercel-supported TLDs can be checked.Input Parameters
Output
Get price data for multiple domains
Get price data for multiple domains
Read System Bypass
Read System Bypass
Get Remote Caching Status
Get Remote Caching Status
Get SSL/TLS Certificates
Get SSL/TLS Certificates
Get conditional firewall bypasses
Get conditional firewall bypasses
Retrieve an integration configuration
Retrieve an integration configuration
List products for integration configuration
List products for integration configuration
Get Integration Configurations
Get Integration Configurations
VERCEL_GET_CONFIGURATIONSTool to get configurations for the authenticated user or team. Use when you need to list integration configurations installed on an account or team.Input Parameters
Output
Get a connector
Get a connector
VERCEL_GET_CONNECTORGet a connector. Get the connector by ID. Accepts a dashboard/team requester or a deployment’s project OIDC token; project requesters may only read connectors linked to their project and environment.Input Parameters
scl_abc123 or slack%2Fmy-bot.Output
Get a connector project connection
Get a connector project connection
Get Contact Info Schema
Get Contact Info Schema
VERCEL_GET_CONTACT_INFO_SCHEMATool to retrieve the contact information schema for a domain’s top-level domain (TLD). Use when you need to understand what contact information fields are required for a specific domain registration or transfer. Some TLDs require additional contact information beyond standard fields.Input Parameters
Output
Retrieve a custom environment
Retrieve a custom environment
Get Deployment by ID or URL
Get Deployment by ID or URL
Get a check run
Get a check run
Get deployment details
Get deployment details
VERCEL_GET_DEPLOYMENT_DETAILSDEPRECATED: Use VERCEL_VERCEL_GET_DEPLOYMENT instead. Retrieves detailed information about a specific deployment. Use after triggering a deployment to inspect status and configuration. Poll with exponential backoff (5–30s) since deployments may remain in QUEUED or BUILDING state for minutes; tight polling triggers HTTP 429. Deployment is live only when readyState=READY and errorCode is absent; other states (QUEUED, BUILDING, CANCELED, ERROR) mean no traffic is served. Build failures surface in readyState=ERROR with errorCode and errorMessage fields — successful creation does not guarantee a successful build. Example: { “idOrUrl”: “dpl_Br7FSrRXuUkSHj7t7GVVadyuGvFg” }Input Parameters
Output
Get Deployment Events (Deprecated)
Get Deployment Events (Deprecated)
VERCEL_GET_DEPLOYMENT_EVENTSDEPRECATED: Use VERCEL_VERCEL_GET_DEPLOYMENT_EVENTS2 instead. Tool to retrieve events related to a specific deployment. Use when monitoring or debugging deployment history or streaming real-time events. Example: “Get events for deployment dpl_xxx since 1540095775941.”Input Parameters
Output
Get Deployment Events
Get Deployment Events
Retrieve the feature flags of a deployment
Retrieve the feature flags of a deployment
Get Deployment File Contents
Get Deployment File Contents
VERCEL_GET_DEPLOYMENT_FILE_CONTENTSRetrieve the contents of a specific file from a Vercel deployment. Returns the file content as a base64-encoded string. First use ‘List Deployment Files’ to get the file_id (uid), then use this action to get the actual file contents.Input Parameters
Output
Get Deployment Logs (Deprecated)
Get Deployment Logs (Deprecated)
VERCEL_GET_DEPLOYMENT_LOGSDEPRECATED: Use VERCEL_VERCEL_GET_DEPLOYMENT_EVENTS2 instead. Tool to retrieve logs for a specific Vercel deployment. Use when monitoring deployment execution, debugging issues, or analyzing deployment performance. Example: “Get logs for deployment dpl_xxx since 1540095775941.”Input Parameters
Output
Get Deployment Runtime Logs
Get Deployment Runtime Logs
VERCEL_GET_DEPLOYMENT_LOGS2Tool to retrieve runtime logs for a specific Vercel deployment by project and deployment ID. Use when you need to debug or monitor deployment execution with detailed runtime information.Input Parameters
Output
Get Deployments
Get Deployments
Get Domain Information
Get Domain Information
Get Domain Configuration
Get Domain Configuration
VERCEL_GET_DOMAIN_CONFIGTool to get a domain’s configuration details from Vercel. Use when you need to check how a domain is configured, what DNS records are recommended, or verify domain setup. Returns configuration status, accepted SSL challenges, and recommended DNS records (CNAME and IPv4).Input Parameters
Output
Get contact verification status for a domain
Get contact verification status for a domain
VERCEL_GET_DOMAIN_CONTACT_VERIFICATIONGet contact verification status for a domain. Get the registrant contact verification status for a domain. Use this after purchasing a domain to determine whether the contact has been verified. Note that a bought_too_recently error will be returned if the domain was bought less than 30 minutes before the request.Input Parameters
Output
List Project Domains by Apex Domain
List Project Domains by Apex Domain
Get DNS Record by ID
Get DNS Record by ID
Get Domain Transfer Info
Get Domain Transfer Info
Get Domain Verification Record
Get Domain Verification Record
VERCEL_GET_DOMAIN_VERIFICATION_RECORDGet Domain Verification Record. Get the TXT verification record needed to claim ownership of a domain for the authenticated team. The caller must add this TXT record to _vercel.{domain} in their DNS configuration, then call POST /domains/:domain/claim to complete the ownership transfer.Input Parameters
Output
Find a Drain by id
Find a Drain by id
Get All Drains
Get All Drains
Get a drive
Get a drive
Get Edge Config
Get Edge Config
Get Edge Config Backup
Get Edge Config Backup
Get Edge Config Item
Get Edge Config Item
Get Edge Config Schema
Get Edge Config Schema
Get Edge Config Token
Get Edge Config Token
VERCEL_GET_EDGE_CONFIG_TOKENTool to retrieve details of a specific token associated with an Edge Config. Use when you need metadata for an existing Edge Config token.Input Parameters
Output
Get Firewall Configuration
Get Firewall Configuration
Get a flag
Get a flag
Get a segment
Get a segment
Get project flag settings
Get project flag settings
List Git Namespaces
List Git Namespaces
VERCEL_GET_GIT_NAMESPACESTool to list Git namespaces (organizations/users) by provider. Use this to discover available Git namespaces for integration with projects.Input Parameters
Output
Get an issuer
Get an issuer
VERCEL_GET_KMS_ISSUERGet an issuer. Retrieve a single KMS issuer by its ID. Accepts a team or organization bearer token, or an OIDC token authorized by one of the issuer’s policies (e.g. a connex-grant token). The OIDC path returns the issuer without policies, since a policy token only proves signing access, not management access.Input Parameters
Output
Get microfrontends config for a deployment
Get microfrontends config for a deployment
Get microfrontends config for a project
Get microfrontends config for a project
List microfrontends groups
List microfrontends groups
List projects in a microfrontends group
List projects in a microfrontends group
Get a named sandbox
Get a named sandbox
VERCEL_GET_NAMED_SANDBOXGet a named sandbox. Retrieves a named sandbox by name, including its current sandbox and routes. If the sandbox is stopped and resume is true, a new sandbox will be created from the most recent snapshot. Returns 404 if the named sandbox or its configuration no longer exists.Input Parameters
Output
Lists disabled Observability Plus projects
Lists disabled Observability Plus projects
Get Observability Schema
Get Observability Schema
Get Observability Metric Schema
Get Observability Metric Schema
Get or create a drive
Get or create a drive
VERCEL_GET_OR_CREATE_DRIVEGet or create a drive. Gets an existing drive by project and name, or creates it when it does not exist.Input Parameters
Output
Get a domain order
Get a domain order
Get Vercel Project (Deprecated)
Get Vercel Project (Deprecated)
VERCEL_GET_PROJECTDEPRECATED: Use VERCEL_VERCEL_GET_PROJECT2 instead. Tool to retrieve information about a Vercel project by ID or name. Use when you need project metadata after obtaining its identifier.Input Parameters
Output
Find Project by ID or Name
Find Project by ID or Name
Get project daemons
Get project daemons
Get a check
Get a check
Get Project Domain
Get Project Domain
VERCEL_GET_PROJECT_DOMAINTool to retrieve details about a specific domain attached to a Vercel project. Use when you need to check domain configuration, verification status, redirect settings, or git branch associations.Input Parameters
Output
List Project Domains
List Project Domains
VERCEL_GET_PROJECT_DOMAINSTool to retrieve all domains attached to a Vercel project. Use when you need to verify domain configuration, check verification status, audit redirect/branch bindings, or before performing domain operations.Input Parameters
Output
Get Project Environment Variable
Get Project Environment Variable
Get Projects
Get Projects
VERCEL_GET_PROJECTSTool to retrieve a list of projects from Vercel. Use this to get project information with optional filtering by repository, team, or other criteria.Input Parameters
Output
Get a project trace by request ID
Get a project trace by request ID
List Promote Aliases
List Promote Aliases
Gets project-level redirects.
Gets project-level redirects.
Get blob upload status
Get blob upload status
Get a repository
Get a repository
Get a repository image
Get a repository image
VERCEL_GET_REPOSITORY_IMAGEGet a repository image. Fetch an individual image from a repository, including its tags and Dockerfile history entries with discriminated layer details for UI rendering. The image may be addressed by its internal id (image_...) or by its manifest digest (sha256:...).Input Parameters
Output
Get a repository tag
Get a repository tag
VERCEL_GET_REPOSITORY_TAGGet a repository tag. Fetch a single tag from a repository, including the backing image’s metadata and VHS-readiness status.Input Parameters
Output
Get Rolling Release
Get Rolling Release
Get Rolling Release Billing Status
Get Rolling Release Billing Status
Get Rolling Release Config
Get Rolling Release Config
Get project routing rules
Get project routing rules
Get routing rule version history
Get routing rule version history
VERCEL_GET_ROUTE_VERSIONSGet routing rule version history. Get the version history for a project’s routing rules. Returns the staging version (if one exists) followed by production versions, most recent first. The staging version has isStaging: true and the current production version has isLive: true.Input Parameters
Output
Get Runtime Logs (Deprecated)
Get Runtime Logs (Deprecated)
VERCEL_GET_RUNTIME_LOGSDEPRECATED: Use VERCEL_GET_DEPLOYMENT_LOGS2 instead. Tool to retrieve runtime logs for a specific Vercel deployment. Use when monitoring deployment execution, debugging runtime issues, or analyzing deployment performance. Runtime logs show application behavior during execution, including errors and request information.Input Parameters
Output
Get Sandbox Command
Get Sandbox Command
Read Firewall Actions Summary by Project
Read Firewall Actions Summary by Project
VERCEL_GET_SECURITY_FIREWALL_EVENTS_SUMMARYRead Firewall Actions Summary by Project. Aggregate counts over the firewall actions matched by the same filters as GET /v1/security/firewall/events, without fetching any rows. Counts are of policies (mitigations), including ones that matched no requests.Input Parameters
Output
Get a session
Get a session
Stream command logs
Stream command logs
VERCEL_GET_SESSION_COMMAND_LOGSStream command logs. Streams the output of a command in real-time using newline-delimited JSON (ND-JSON). Each entry includes the output data and stream type. Stream types include stdout, stderr, and error (for stream failures).Input Parameters
Output
Get a snapshot
Get a snapshot
Get Storage Store
Get Storage Store
Get Team Details
Get Team Details
VERCEL_GET_TEAMRetrieves detailed information about a specific Vercel team by its ID or slug. Returns comprehensive team metadata including billing, membership, resource configuration, and settings. Use this to get team details before performing team-specific operations. The teamId parameter accepts either a team ID (e.g., ‘team_xxx’) or team slug (e.g., ‘my-team’).Input Parameters
Output
Get access request status
Get access request status
Get All Teams
Get All Teams
Get TLD Info
Get TLD Info
VERCEL_GET_TLD_INFOTool to get information about a specific top-level domain (TLD). Use when you need to check supported language codes for domain registration.Input Parameters
Output
Get TLD Price
Get TLD Price
VERCEL_GET_TLD_PRICETool to get pricing information for a specific top-level domain (TLD). Use when you need to check domain registration, renewal, or transfer costs.Input Parameters
Output
List User Events
List User Events
VERCEL_GET_USER_EVENTSTool to list user events. Use when you need to retrieve events generated by a user or team, such as logins, deployments, and team activities.Input Parameters
principalId instead. If principalId and userId both exist, principalId will be used.principalId parameter may be specified to filter events generated by a specific principal.Output
Get a specific invocation attempt
Get a specific invocation attempt
Get log lines for an invocation attempt
Get log lines for an invocation attempt
Get an invocation with its jobs and tasks
Get an invocation with its jobs and tasks
VERCEL_GET_VERCEL_CI_INVOCATION_TREEGet an invocation with its jobs and tasks. Returns an invocation attempt together with every job definition, its latest job run, and the task definitions and active task runs of that job run. Defaults to the latest attempt when attempt is omitted. With follow=1 the response is a newline-delimited JSON stream: a {"type":"tree", ...} event with the full tree is sent immediately and again whenever it changes, and a final {"type":"end","reason":...} event is sent when the attempt finishes (completed) or the stream reaches its maximum duration (timeout), after which clients should reconnect.Input Parameters
Output
Get a specific job definition
Get a specific job definition
Get a specific job run attempt
Get a specific job run attempt
Get log lines for a specific job run attempt
Get log lines for a specific job run attempt
Get Vercel CI settings for a connected repository
Get Vercel CI settings for a connected repository
Get the current status of a Vercel CI task analysis
Get the current status of a Vercel CI task analysis
Get log lines for the tasks of an invocation attempt
Get log lines for the tasks of an invocation attempt
VERCEL_GET_VERCEL_CI_TASK_LOGSGet log lines for the tasks of an invocation attempt. Returns log lines for the tasks of an invocation attempt in a single request, grouped by task. Tasks can be narrowed by name and by conclusion, for example conclusion=failed to fetch only the logs of failed tasks. With search, every matching task is searched at once and only tasks with matching lines are returned.Input Parameters
limit is ignored, and at most 1000 lines are returned.Output
Get log lines for a specific task run attempt
Get log lines for a specific task run attempt
VERCEL_GET_VERCEL_CI_TASK_RUN_LOGSGet log lines for a specific task run attempt. Get Task Run Logs With follow=1 the response is a newline-delimited JSON stream of log lines that ends once the task run has finished and its logs are flushed, or when the stream reaches its maximum duration.Input Parameters
Output
Get the version history for a project's redirects.
Get the version history for a project's redirects.
Get Webhook
Get Webhook
VERCEL_GET_WEBHOOKTool to retrieve details of a specific webhook by ID. Use when you need to inspect webhook configuration, events, or metadata.Input Parameters
Output
Start a blob upload
Start a blob upload
VERCEL_INITIATE_REGISTRY_BLOB_UPLOADStart a blob upload. POST /v2/:teamSlug/:projectSlug/:repositoryName/blobs/uploads/[?mount=<digest>&from=<repo>] Initiate a blob upload. Returns a UUID in the Location header that the client uses for subsequent PATCH (chunk) and PUT (complete) requests.Input Parameters
Output
Invalidate Cache By Source Images
Invalidate Cache By Source Images
VERCEL_INVALIDATE_CACHE_BY_SRC_IMAGESTool to invalidate edge cache by source image URLs. Use when you need to mark cached images as stale for specific source images. Invalidated images are revalidated in the background on the next request, ensuring zero latency impact for users.Input Parameters
Output
Invite a user
Invite a user
Kill a command
Kill a command
VERCEL_KILL_SESSION_COMMANDKill a command. Sends a signal to terminate a running command in a session. The signal can be used to gracefully stop (SIGTERM) or forcefully kill (SIGKILL) the process. The command must still be running for this operation to succeed.Input Parameters
Output
List members of an access group
List members of an access group
List projects of an access group
List projects of an access group
List access groups for a team, project or member
List access groups for a team, project or member
List AI Gateway budget defaults
List AI Gateway budget defaults
List AI Gateway budgets
List AI Gateway budgets
VERCEL_LIST_AI_GATEWAY_BUDGETSList AI Gateway budgets. List the team’s AI Gateway budgets (team/project/user scopes, plus default-covered api-key spend) as a flat list, optionally filtered by scope. Without limit or cursor, returns every budget. With either, returns one page ordered by quotaEntityId plus nextCursor (null on the last page) and defaultCoveredCounts. Paging still reads the full merge server-side: the gateway meter list it joins has no cursor.Input Parameters
source: "default"). Defaults to true.Output
List AI Gateway routers
List AI Gateway routers
VERCEL_LIST_AI_GATEWAY_ROUTERSList AI Gateway routers. List the authenticated team’s active and archived custom routers.Input Parameters
teamId or slug, and a supplied ownerId never overrides the authenticated team.Output
List rules
List rules
VERCEL_LIST_AI_GATEWAY_RULESList rules. List the authenticated team’s routing rules, oldest first. Without limit or cursor, returns every rule. With either, returns one page and a nextCursor for the next page (null on the last page). Paging reads and sorts the team’s rules server-side, which is fine at current rule counts.Input Parameters
Output
List virtual model configs
List virtual model configs
VERCEL_LIST_AI_GATEWAY_VIRTUAL_MODEL_CONFIGSList virtual model configs. List virtual model configs. For a team, returns all of its VMCs, or with limit or cursor one page ordered by virtualModelSlug. Across teams, pages newest-first. includeArchived=false omits archived VMCs.Input Parameters
Output
List Vercel Aliases
List Vercel Aliases
VERCEL_LIST_ALIASESTool to list aliases from Vercel API. Use when you need to retrieve aliases with optional filtering by domain, project, or time range. Results are paginated; use limit with since/until to iterate pages. Without filters, results span all projects and the personal account scope.Input Parameters
Output
List All Deployments (Deprecated)
List All Deployments (Deprecated)
VERCEL_LIST_ALL_DEPLOYMENTSDEPRECATED: Use VERCEL_GET_DEPLOYMENTS instead. Lists deployments under your user or team context. Results are cursor-paginated; follow pagination.next until null to retrieve all pages. In team contexts, omitting teamId or slug will cause deployments to appear missing. Example: “List deployments for project QmX…”.Input Parameters
Output
List Auth Tokens
List Auth Tokens
List FOCUS billing charges
List FOCUS billing charges
VERCEL_LIST_BILLING_CHARGESList FOCUS billing charges. Returns the billing charge data in FOCUS v1.3 JSONL format for a specified Vercel team, within a date range specified by from and to query parameters. Supports 1-day granularity with a maximum date range of 1 year. The response is streamed as newline-delimited JSON (JSONL) and can be optionally compressed with gzip if the Accept-Encoding: gzip header is provided. SkuId is the stable product ID. For unmapped items, it is derived from the item identifier. This is only available for Owner, Member, Developer, Security, Billing, and Enterprise Viewer roles for the supplied team.Input Parameters
Output
List runs for a check
List runs for a check
List projects for a connector
List projects for a connector
List connectors
List connectors
VERCEL_LIST_CONNECTORSList connectors. List connectors that belong to a team.Input Parameters
slack, discord, github, linear, linq, salesforce, sendblue, snowflake, snowflake-wif, microsoft-entra, api-key, photon, oauth, or custom.Output
List FOCUS contract commitments
List FOCUS contract commitments
VERCEL_LIST_CONTRACT_COMMITMENTSList FOCUS contract commitments. Returns commitment allocations per contract period in FOCUS v1.3 JSONL format for a specified Vercel team. The response is streamed as newline-delimited JSON (JSONL). This endpoint is only applicable to Enterprise Vercel customers. An empty response is returned for non-Enterprise (Pro/Flex) customers.Input Parameters
Output
List Deployment Aliases
List Deployment Aliases
List check runs for a deployment
List check runs for a deployment
List Deployment Checks
List Deployment Checks
List Deployment Files
List Deployment Files
List DNS Records
List DNS Records
Get Domains
Get Domains
List drives
List drives
Get Edge Config Backups
Get Edge Config Backups
Get Edge Config Items
Get Edge Config Items
Get Edge Configs
Get Edge Configs
Get Edge Config Tokens
Get Edge Config Tokens
List Environment Variables (Deprecated)
List Environment Variables (Deprecated)
VERCEL_LIST_ENV_VARIABLESDEPRECATED: Use FilterProjectEnvs instead. Tool to list environment variables for a specific project. Use when you need to inspect or page through the environment settings before deployment. Each returned env var has independent target scopes (production/preview/development); never assume a variable applies to all environments. Env var changes require a new deployment to take effect. Example: { “projectId”: “prj_nos3l9LxEmu8dYCFBaUVlox26eRJ”, “decrypt”: false, “limit”: 20 }Input Parameters
pagination.next timestamp from a prior response. Repeat requests with each new pagination.next value until no cursor is returned to avoid missing variables.Output
List Event Types
List Event Types
Get Firewall Events by Project
Get Firewall Events by Project
VERCEL_LIST_FIREWALL_EVENTSRetrieve firewall events and security actions for a specific Vercel project. Use this tool when you need to: - Monitor security events and blocked requests for a project - Analyze firewall actions (blocks, challenges, rate limits) over a time period - Investigate suspicious activity or attack patterns - Review which firewall rules are being triggered Note: This endpoint requires appropriate permissions. Enterprise or Pro plans may be required.Input Parameters
Output
List flags
List flags
VERCEL_LIST_FLAGSList flags. Retrieve feature flags for a project. The list can be filtered by state and supports pagination.Input Parameters
GET /v1/projects/:id/feature-flags/flags/:flagIdOrSlug?withMetadata=true for single-flag lookups that need creator metadata.Output
List segments
List segments
List flags
List flags
VERCEL_LIST_FLAGS_V2List flags. Retrieve feature flags for a project. Returns an opaque cursor for pagination.Input Parameters
Output
List flag versions
List flag versions
Get Integration Log Drains
Get Integration Log Drains
List issuers
List issuers
List Secure Compute networks
List Secure Compute networks
List PrivateLink Endpoints
List PrivateLink Endpoints
List all checks for a project
List all checks for a project
List connectors for a project
List connectors for a project
Get Project Custom Environments
Get Project Custom Environments
Get Project Members
Get Project Members
List All Projects (Deprecated)
List All Projects (Deprecated)
VERCEL_LIST_PROJECTSDEPRECATED: Use GetProjects instead. Tool to list all projects accessible to the authenticated user or team. Use this to retrieve project IDs and metadata for further operations. Results are paginated (max 100 per page); iterate using the pagination.next cursor to retrieve all pages — pagination.count reflects only the current page, not the total.Input Parameters
Output
List repositories
List repositories
List repository images
List repository images
List repository permissions
List repository permissions
List Sandboxes
List Sandboxes
List Sandbox Snapshots
List Sandbox Snapshots
List commands
List commands
List sessions
List sessions
VERCEL_LIST_SESSIONSList sessions. Retrieves a paginated list of sessions belonging to a specific sandbox. Results are sorted by creation time and paginated using an opaque cursor.Input Parameters
Output
Get Supported TLDs
Get Supported TLDs
List all flags for a team
List all flags for a team
VERCEL_LIST_TEAM_FLAGSList all flags for a team. Retrieve all feature flags for a team across all projects. The list can be filtered by state and supports pagination.Input Parameters
Output
List team project flag settings
List team project flag settings
List all flags for a team
List all flags for a team
VERCEL_LIST_TEAM_FLAGS_V2List all flags for a team. Retrieve all feature flags for a team across all projects. Returns an opaque cursor for pagination.Input Parameters
Output
Get Team Members
Get Team Members
VERCEL_LIST_TEAM_MEMBERSTool to list all members of a Vercel team. Use when you need to retrieve team member information, check team access permissions, or audit team membership.Input Parameters
Output
List All Teams (Deprecated)
List All Teams (Deprecated)
VERCEL_LIST_TEAMSDEPRECATED: Use VERCEL_VERCEL_GET_TEAMS instead. Tool to list all teams accessible to the authenticated user. Use after authentication to retrieve team IDs and slugs; resolve the correct teamId or slug here before passing it to other Vercel tools (e.g., VERCEL_GET_PROJECT, deployment queries) — an incorrect or missing teamId causes 404 or scoping errors.Input Parameters
Output
List Vercel CI branch suggestions for a team
List Vercel CI branch suggestions for a team
List all attempts for an invocation
List all attempts for an invocation
List invocations for a team, optionally filtered by repository and invocation metadata
List invocations for a team, optionally filtered by repository and invocation metadata
List job definitions for an invocation attempt
List job definitions for an invocation attempt
List all runs for a job definition
List all runs for a job definition
List discovered tasks for a completed Vercel CI task analysis
List discovered tasks for a completed Vercel CI task analysis
List all task definitions for a job run
List all task definitions for a job run
List task runs for a job run
List task runs for a job run
Get List of Webhooks
Get List of Webhooks
Manage Route Version
Manage Route Version
VERCEL_MANAGE_ROUTE_VERSIONPromote, restore, or discard an existing routing-rule version; never create one.Input Parameters
Output
Move Project Domain
Move Project Domain
VERCEL_MOVE_PROJECT_DOMAINTool to move a domain from one Vercel project to another. Use when you need to transfer domain ownership between projects.Input Parameters
Output
Update Global Config schema
Update Global Config schema
Pause Vercel Project
Pause Vercel Project
VERCEL_PAUSE_PROJECTTool to pause a Vercel project. Use when you need to temporarily disable a project to prevent new deployments and stop serving traffic.Input Parameters
Output
Update Team Directory Sync Role Mappings
Update Team Directory Sync Role Mappings
Pull Environment Variables
Pull Environment Variables
VERCEL_PULL_ENVIRONMENT_VARIABLESPull effective runtime and build environment maps for a project or deployment.Input Parameters
Output
Override a project daemon's instance counts
Override a project daemon's instance counts
VERCEL_PUT_PROJECT_DAEMON_INSTANCESOverride a project daemon’s instance counts. Override the instance counts of a daemon in the given regions, without changing its configuration or the overrides of other regions.Input Parameters
null count removes the region’s override. An empty map removes all overrides.Output
Reads an access group
Reads an access group
Reads an access group project
Reads an access group project
Read Firewall Configuration
Read Firewall Configuration
VERCEL_READ_FIREWALL_CONFIGTool to read firewall configuration for a Vercel project. Use when you need to inspect current firewall settings, IP rules, or custom security rules for a project.Input Parameters
Output
Read a Secure Compute network
Read a Secure Compute network
Read a PrivateLink endpoint
Read a PrivateLink endpoint
Read Sandbox File
Read Sandbox File
Record Artifacts Cache Events
Record Artifacts Cache Events
Remove System Bypass Rule
Remove System Bypass Rule
Remove a custom environment
Remove a custom environment
Remove Domain from Project
Remove Domain from Project
VERCEL_REMOVE_PROJECT_DOMAINTool to remove a domain from a Vercel project. Use when you need to detach a domain from a project or clean up domain associations.Input Parameters
Output
Remove a Project Member
Remove a Project Member
Remove a repository permission
Remove a repository permission
Remove a Team Member
Remove a Team Member
VERCEL_REMOVE_TEAM_MEMBERRemove a Team Member. Remove a Team Member from the Team, or dismiss a user that requested access, or leave a team. Directory Sync members can be removed when their directory email is absent or does not match the user’s primary or verified secondary emails.Input Parameters
Output
Update connector trigger destinations
Update connector trigger destinations
VERCEL_REPLACE_CONNECTOR_TRIGGER_DESTINATIONSUpdate connector trigger destinations. Replace the full set of destinations that receive trigger requests for a connector.Input Parameters
scl_abc123 or slack%2Fmy-bot.Output
Replace Domain Records (Unversioned)
Replace Domain Records (Unversioned)
VERCEL_REPLACE_DOMAINS_BY_DOMAIN_RECORDSCall Vercel’s unversioned domain-record replacement operation. Operation semantics are undocumented. Matches the official SDK’s exact PUT /domains/{domain}/records invocation, which accepts only a domain and sends no request body. This does not expose the CLI’s versioned zone-file import operation; equivalence with that route is unverified.Input Parameters
Output
Update Vercel Firewall Configuration
Update Vercel Firewall Configuration
Request access to a team
Request access to a team
Request Delete User Account
Request Delete User Account
Promote Deployment to Production
Promote Deployment to Production
VERCEL_REQUEST_PROMOTETool to promote a deployment to production by pointing all production domains for a project to the given deployment. Use this when you need to make a specific deployment live without rebuilding. The deployment must be in ‘STAGED’ state (never served production traffic) and the project must have auto-assignment of custom production domains disabled. For deployments that have already been promoted (seen production traffic), use instant rollback instead.Input Parameters
Output
Point production traffic to a previous production deployment by ID
Point production traffic to a previous production deployment by ID
Force restart a project daemon instance
Force restart a project daemon instance
Restore Global Config backup
Restore Global Config backup
Restore staged project-level redirects to their production version.
Restore staged project-level redirects to their production version.
VERCEL_RESTORE_REDIRECTSRestore staged project-level redirects to their production version.. Restores the provided redirects in the staging version to the value in the production version. If no production version exists, removes the redirects from staging.Input Parameters
Output
Retry a terminal Vercel CI invocation attempt
Retry a terminal Vercel CI invocation attempt
Get Domain Availability and Pricing
Get Domain Availability and Pricing
VERCEL_SEARCH_DOMAINSGet Domain Availability and Pricing. Start domain research here. Get registration availability and pricing for 1–200 exact domain names. Returns results in input order, with registration and renewal prices in USD for available domains. No authentication required.Input Parameters
Output
Search Git Repositories
Search Git Repositories
Search Request Logs
Search Request Logs
Search the task logs of several invocation attempts
Search the task logs of several invocation attempts
VERCEL_SEARCH_VERCEL_CI_LOGSSearch the task logs of several invocation attempts. Searches the task logs of up to 50 invocation attempts at once, for example the most recent runs of a branch from GET /v2/vercel-ci/invocations. Only invocations and tasks with matching lines are returned. When more than 1000 lines match, the newest are kept.Input Parameters
Output
Stages new redirects for a project.
Stages new redirects for a project.
Stage routing rules
Stage routing rules
Start a rolling release for the project
Start a rolling release for the project
Stop a session
Stop a session
Test Drain Configuration
Test Drain Configuration
VERCEL_TEST_DRAINTool to validate a drain delivery configuration by sending a test request. Use when you need to verify that a drain endpoint is properly configured and can receive events before creating the actual drain.Input Parameters
Output
Transfer In Domain
Transfer In Domain
VERCEL_TRANSFER_IN_DOMAINTool to transfer a domain to Vercel from another registrar. Use when you need to migrate domain registration to Vercel. Before transferring, obtain the authorization code from the current registrar and verify the domain is unlocked and eligible for transfer.Input Parameters
Output
Unpause Vercel Project
Unpause Vercel Project
Update an access group
Update an access group
Update an access group project
Update an access group project
Update rule
Update rule
Update virtual model config
Update virtual model config
VERCEL_UPDATE_AI_GATEWAY_VIRTUAL_MODEL_CONFIGUpdate a virtual model config by its body slug and supplied update fields.Input Parameters
Output
Update virtual model config
Update virtual model config
VERCEL_UPDATE_AI_GATEWAY_VIRTUAL_MODEL_CONFIG_BY_SLUGUpdate virtual model config. Update a virtual model config by path slugInput Parameters
{ slug, ...attributes }. For kind=alias: ordered fallback model slugs, optionally led by one conditional { model, when } entry, used when the primary model’s answers match when.Output
Update Attack Challenge Mode
Update Attack Challenge Mode
VERCEL_UPDATE_ATTACK_CHALLENGE_MODETool to update Attack Challenge mode for a Vercel project. Use when you need to enable or disable enhanced security protection against potential attacks. Attack Challenge mode adds an extra verification layer to protect deployments.Input Parameters
Output
Update a custom environment
Update a custom environment
Update a check run
Update a check run
Update DNS Record
Update DNS Record
VERCEL_UPDATE_DNS_RECORDTool to update an existing DNS record. Use when you need to modify DNS record properties such as value, name, type, TTL, or comment. Ensure you have the record ID before calling this action.Input Parameters
Output
Patch Domain
Patch Domain
VERCEL_UPDATE_DOMAINTool to update or move an apex domain on Vercel. Use when you need to modify domain configuration (zone settings) or transfer a domain to another team. For ‘update’ operation, you can modify the zone configuration. For ‘move-out’ operation, provide a destination team ID.Input Parameters
Output
Update auto-renew for a domain
Update auto-renew for a domain
Update nameservers for a domain
Update nameservers for a domain
Update Edge Config
Update Edge Config
VERCEL_UPDATE_EDGE_CONFIGTool to update an Edge Config by changing its slug. Use when you need to rename an Edge Config to reflect a new purpose or organizational structure.Input Parameters
Output
Update Edge Config Items
Update Edge Config Items
Update Edge Config Schema
Update Edge Config Schema
Update Firewall Configuration
Update Firewall Configuration
VERCEL_UPDATE_FIREWALL_CONFIGTool to incrementally update Vercel Firewall configuration for a project using PATCH. Use when you need to: enable/disable the firewall (‘firewallEnabled’), add/remove IP blocking rules (‘ip.insert’/‘ip.remove’), manage custom rules (‘rules.insert’/‘rules.update’/‘rules.remove’), or configure OWASP CRS rules (‘crs.update’/‘crs.disable’). Each call modifies a single aspect of the configuration. For full replacement of firewall config, use VERCEL_PUT_FIREWALL_CONFIG instead.Input Parameters
Output
Update a flag
Update a flag
Update a segment
Update a segment
Update project flag settings
Update project flag settings
Update deployment integration action
Update deployment integration action
Update the microfrontends settings
Update the microfrontends settings
VERCEL_UPDATE_MICROFRONTENDSUpdate the microfrontends settings. Update the microfrontends settings for a project.Input Parameters
Output
Update a microfrontends group
Update a microfrontends group
VERCEL_UPDATE_MICROFRONTENDS_GROUPUpdate a microfrontends group. Updates a microfrontends group’s settings.Input Parameters
Output
Update a Secure Compute network
Update a Secure Compute network
Updates a disabled Observability Plus project setting
Updates a disabled Observability Plus project setting
Update a PrivateLink endpoint
Update a PrivateLink endpoint
VERCEL_UPDATE_PRIVATE_LINK_ENDPOINTUpdate a PrivateLink endpoint. Updates a PrivateLink endpoint (name, privateDns). Changes to endpoints of the same project are serialized. If another change holds them for too long, the request fails with 503 service_unavailable and can be retried. If the change may have completed but the outcome is unknown, it fails with 409 uncertain_outcome; read the endpoint before retrying.Input Parameters
true, resolves the endpoint service through its private DNS names, which are then returned in privateDnsNames. When false, clears them. When omitted, the current setting is kept. At least one of name or enablePrivateDns must be provided.Output
Update Vercel Project (Deprecated)
Update Vercel Project (Deprecated)
VERCEL_UPDATE_PROJECTDEPRECATED: Use VERCEL_VERCEL_UPDATE_PROJECT2 instead. Tool to update an existing project. Partial-update: omitted fields are preserved, but nullable fields explicitly set to null will be cleared. Changes (including rootDirectory, buildCommand) only take effect on subsequent deployments — trigger a new deployment with VERCEL_CREATE_NEW_DEPLOYMENT after updating. Use after confirming the project ID or name.Input Parameters
Output
Update Vercel Project (v2)
Update Vercel Project (v2)
VERCEL_UPDATE_PROJECT2Tool to update an existing Vercel project configuration. Use when you need to modify project settings such as framework, build commands, environment configuration, or deployment protection settings.Input Parameters
null is used no framework is selectednull is used this value will be automatically detectednull is used it will default to the project rootnull is used this value will be automatically detectednull is used this value will be automatically detectedOutput
Update a check
Update a check
Update Project Data Cache
Update Project Data Cache
VERCEL_UPDATE_PROJECT_DATA_CACHETool to update the data cache feature for a Vercel project. Use when you need to enable or disable data caching for a project’s deployments.Input Parameters
Output
Update Project Domain
Update Project Domain
VERCEL_UPDATE_PROJECT_DOMAINTool to update a project domain in Vercel. Use when you need to modify domain settings such as git branch association, redirects, or redirect status codes for an existing project domain.Input Parameters
Output
Update Project Protection Bypass
Update Project Protection Bypass
Updates the description for a rollback
Updates the description for a rollback
Update the rolling release settings for the project
Update the rolling release settings for the project
VERCEL_UPDATE_ROLLING_RELEASE_CONFIGUpdate the rolling release settings for the project. Update (or disable) Rolling Releases for a project. When disabling with the resolve-on-disable feature flag enabled, any active rolling release document is resolved using the disableRolloutAction parameter: “abort” to roll back (default), or “complete” to promote the canary to production. When enabling or updating config, changes only affect the next production deployment and do not alter a rollout that’s already in-flight. Note: Enabling Rolling Releases automatically enables skew protection on the project with the default value if it wasn’t configured already.Input Parameters
Output
Update a sandbox
Update a sandbox
VERCEL_UPDATE_SANDBOXUpdate a sandbox. Updates the configuration of a sandbox. Only the provided fields will be modified; omitted fields remain unchanged.Input Parameters
Output
Update network policy
Update network policy
VERCEL_UPDATE_SESSION_NETWORK_POLICYUpdate network policy. Replaces the network access policy of a running session. Use this to control which external hosts the session can communicate with. This is a full replacement. Any previously configured network rules will be overwritten.Input Parameters
Output
Update Project Static IPs
Update Project Static IPs
VERCEL_UPDATE_STATIC_IPSTool to configure Static IPs for a Vercel project. Use when you need to enable or configure Static IPs for builds or specific regions. Requires either ‘builds’ or ‘regions’ parameter to be provided.Input Parameters
Output
Update Team
Update Team
Update a Team Member
Update a Team Member
VERCEL_UPDATE_TEAM_MEMBERUpdate a Team Member. Update the membership of a Team Member on the Team specified by teamId, such as changing the role of the member, or confirming a request to join the Team for an unconfirmed member. The authenticated user must be an OWNER of the Team.Input Parameters
Output
Update URL Protection Bypass
Update URL Protection Bypass
VERCEL_UPDATE_URL_PROTECTION_BYPASSTool to update the protection bypass for a URL. Use when you need to configure shareable links with TTL, revoke/regenerate links, set user-scoped access permissions, or manage alias protection overrides.Input Parameters
Output
Enable or disable Vercel CI for a connected repository
Enable or disable Vercel CI for a connected repository
Promote a staging version to production or restore a previous production version.
Promote a staging version to production or restore a previous production version.
Upload Cache Artifact
Upload Cache Artifact
Upload Deployment File
Upload Deployment File
VERCEL_UPLOAD_FILETool to upload deployment files to Vercel. Use when preparing files for a Vercel deployment. The uploaded file is stored and returns CDN URLs for use in deployment creation.Input Parameters
Output
Upload a project avatar
Upload a project avatar
VERCEL_UPLOAD_PROJECT_AVATARUpload a project avatar. Upload an image as the avatar of the project identified by idOrName. The request body is the raw bytes of a JPG, PNG, or SVG image; the Content-Type header must declare which. SVG payloads are sanitized and optimized server-side before storage. The final SHA-1 of the stored bytes becomes the project’s avatar value. The actual upload pipeline (validation, sanitization, S3 write, conditional updateProject, and event emission) lives in the shared @api/project-avatar-upload helper so it can be reused by background workers.Input Parameters
Output
Upload a blob chunk
Upload a blob chunk
VERCEL_UPLOAD_REGISTRY_BLOB_CHUNKUpload a blob chunk. PATCH /v2/:teamSlug/:projectSlug/:repositoryName/blobs/uploads/:uuid Upload a chunk of blob data. The request body is streamed directly to S3 as a multipart upload part while hashing incrementally. The client may call this multiple times for chunked uploads.Input Parameters
Output
Push an image manifest
Push an image manifest
VERCEL_UPLOAD_REGISTRY_MANIFESTPush an image manifest. PUT /v2/:teamSlug/:projectSlug/:repositoryName/manifests/:reference Upload an image manifest. The digest is computed from the body and returned in the Docker-Content-Digest header.Input Parameters
Output
Upsert AI Gateway budget
Upsert AI Gateway budget
Upsert AI Gateway budget default
Upsert AI Gateway budget default
Create or update a connector project connection
Create or update a connector project connection
VERCEL_UPSERT_CONNECTOR_PROJECT_CONNECTIONCreate or update a connector project connection. Connect a connector to a project, or replace the environments on an existing project connection.Input Parameters
scl_abc123 or slack%2Fmy-bot.Output
Verify Project Domain
Verify Project Domain
VERCEL_VERIFY_PROJECT_DOMAINAttempts to verify a project domain by checking if DNS challenges are correctly configured. Call this after adding a domain to a project and setting up the required DNS TXT records. Returns verified=true if DNS is correctly configured, or an error with the required DNS records if verification fails.Input Parameters
Output
Who Am I
Who Am I
Write to command stdin
Write to command stdin
VERCEL_WRITE_SESSION_COMMAND_STDINWrite to command stdin. Writes data to the stdin of a running command, and optionally closes it. The command must have been started with attachStdin set to true. Writes are applied in the order they are received. Send them one at a time to keep the data in order. A write returns once the command has accepted the data, and fails with a 504 after 30 seconds if the command is not reading stdin. Each write counts against the sandbox control plane rate limit, so batch small writes where possible. Set offset to the position in stdin where data starts to make a request safe to resend, for example after a 502 or 504: bytes the command has already received are skipped, and an offset past them fails with a 409. The response returns bytesWritten, the total written so far, and a 504 includes it in the error when the sandbox reports it. A request with no data and no close writes nothing and returns it.Input Parameters
data. Use this for commands that wait for end of input.data starts. Bytes before the total already written are skipped, so a resent request does not write them twice. Fails with 409 if it is past the bytes written so far. Without it, data is appended.Output
Write files
Write files
VERCEL_WRITE_SESSION_FILESWrite files. Uploads and extracts files to a session’s filesystem. Files must be uploaded as a gzipped tarball (.tar.gz) with the Content-Type header set to application/gzip. The tarball contents are extracted to the session’s working directory, or to a custom directory specified via the x-cwd header.